BQ34110: GPCCEDV

K.Yaita

Part Number: BQ34110
Other Parts Discussed in Thread: GPCCEDV, BQSTUDIO, BQ4050,

Hi Team,

I understand GPCCEDV will report the following ten parameters.
>EMF, EDVC0, EDVC1, EDVR1, EDVR0, EDVT0, EDVTC, VOC75, VOC50, VOC25

1)
I believe the following seven paramteres should be set to the following red part in bqStudio.
Is my understanding correct?
>EMF, EDVC0, EDVC1, EDVR1, EDVR0, EDVT0, EDVTC

2)
I couldn't find which should I set the following parameters in bqStudio?
>VOC75, VOC50, VOC25

Best Regards,
Yaita

over 3 years ago

0 K.Yaita over 3 years ago

Guru 29690 points

Regarding question 2), I could find the following similar post for BQ4050.
https://e2e.ti.com/support/power-management/f/196/t/917574?tisearch=e2e-quicksearch&keymatch=VOC75

Can I ignore the following three parameters for BQ34110?
It seems Technical Reference Manual of BQ34110 doesn't show these parameters..
>VOC75, VOC50, VOC25

Your support would be appreciated.

Best Regards,
Yaita

0 Matt Sunna over 3 years ago in reply to K.Yaita

TI__Guru* 77343 points

Hi Yaita,

Yes, this is correct. These 3 parameters are not needed for the BQ34110.

Best regards,

Matt

Power management

Power management forum

BQ34110: GPCCEDV