TPS62366B: I2C

Takashi Yamaguchi

Part Number: TPS62366B
Other Parts Discussed in Thread: TPS62366AEVM-757

Hi team,

I received a question about the I2C of TPS62366B from my customer.

Assuming that the minimum setup time for the next CLK is kept, will there be any problems in using the device if the maximum hold time for the current CLK is exceeded by 3.45us?

Regards,

Yamaguchi

over 3 years ago

0 Dorian Brillet de Cande over 3 years ago

TI__Genius 14856 points

Hello Yamaguchi,

If you are exceeding the specification on the maximum hold time (Exceeding 3.45us), you may experience mismatch between what I2C command was sent and what the interpretation from TPS62366B is.

Why would customer challenge this 3.45 maximum hold time value ?

If necessary, you can verify this with the TPS62366AEVM-757.

Let me know,

Dorian

0 Dorian Brillet de Cande over 3 years ago in reply to Dorian Brillet de Cande

TI__Genius 14856 points

Hello Yamaguchi,

Do you have any further questions here ?
Please, let me know.

Thank you,

Dorian

0 Takashi Yamaguchi over 3 years ago in reply to Dorian Brillet de Cande

TI__Genius 11090 points

Hi Dorian-san,

Thank you for your support. I will get back to you when I get the feedback from the customer.

Regards,

Yamaguchi

Power management

Power management forum

TPS62366B: I2C