Other Parts Discussed in Thread: EV2400, BQSTUDIO, BQEVSW,
Where can I download the BQ evaluation software to learn the gauge ?
In the SLUA903 procedure, in section 3.2.1 I do the commands 0x21 and 0x41 but the value of Update Status 0 remains at 02 and does not go to 04. What is GaugingStatus [REST] flag for the gauge BQ27510-G3, I don't find in Technical Reference Manual BQ27510-G3 ?
SLUA903 is a good reference for the procedure and the charge cycling for this gauge, but the update status registers are a little different for the bq27510-g3.
For update status, 2 means fully learned:
5.1.9 Update Status 0 and Update Status 1 The Update Status n registers are modified automatically by the fuel gauge and the TI evaluation software during the process of creating a golden Data Flash file. A golden file with optimized Qmax and resistance values should have the Update Status = 2.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.