bq27441DRZR-G1A chemistry id update with bq studio

nikunj patel

Other Parts Discussed in Thread: BQSTUDIO, GPCCHEM

hello

I want to perform the bq27441DRZR-G1A chemistry id process using bq studio 1.2.52.1

Query: fuel gauge bq27441DRZR-G1A and using the battery is 3.6V @ 1600mAh LI-Ion /Li-poly 5.76W

chemistry id supported for this fuel gauge with a battery? because I connect the fuel gauge with bq studio but I not seen the chemistry id tab if I select different Guage this option is available.

thanks

-Nikunj

over 3 years ago

0 Jessica H. over 3 years ago

TI__Genius 11535 points

Hi Nikunj,

You cannot change the chemID for this gauge. The chemID for bq27441DRZR-G1A is 0x0128. I suggest using a different fuel gauge if you want to use a different chemID.

Best,

Jessica

0 nikunj patel over 3 years ago

Prodigy 30 points

Jessica

i don't want to change chem id of the fuel gauge. I'm saying the chemistry tab option not seen in bq studio GUI when I connect this gauge.I want to process for battery chemistry id.

thanks

-Nikunj

0 Wyatt Keller over 3 years ago in reply to nikunj patel

TI__Guru** 102415 points

Hello Nikunj,

This gauge is a ROM based gauge, the chem ID tab is not in bqStudio for this gauge because you cannot change the chem ID. The chem ID is based on the part number (G1A, G1B, etc)

If you want to test if the default ID for the G1A is a good fit for your battery you can submit data following the GPCCHEM tool to make sure it is a good match for your battery, or if you will need a flash based gauge to program a better fitting chem ID.

Sincerely,

Wyatt Keller

Power management

Power management forum

bq27441DRZR-G1A chemistry id update with bq studio