• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 373 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

fast charge & slow charge in BQ24133

sarat kmr
Prodigy 80 points

Other Parts Discussed in Thread: BQ24133

Dear Rachel ,

i want to know what is fast charge and slow charge specifications in BQ24133 . what are the factors to be taken in to consideration . Please kindly send answer to my query .

Thanks & Regards ,

sarat

  • 0
    TI__Expert 3160 points

    Sarat,

    The Precharge/Fast Charge phases are shown in Fig 17 (datasheet pg 16)

    The fast charge current (datasheet pg 3) is set using the ISET pin. Pre-charge is always 1/10th of the fast charge current. 

    BAT LOWV threshold which is the battery voltage level that separates the precharge and fast charge phases is depended on the CELL pin configuration. The respective VLOWV levels are found in the datasheet on pg 8:

     

     

    Best Regards,

    Rachel