• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 767 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS92513: the delay time between Vadj and Vsense

Sho Ogane
Genius 5575 points

Part Number: TPS92513

Hi all.

My customer uses TPS92513.

When enable is high, the LED starts emiting light after 500 ms.This is normal pattern.
However, when enable is high, the LED starts emiting light after 5~8 sec.

I would like to know the defferential. What could be the cause?
Have you experienced such a problem?

If you need the schematics and waveform, I can send the file,
but the data is confidential.
So please give me the message to the following e-mail.
e-mail : ogane-s@clv.macnica.co.jp

I would like to get your comment as soon as possile.

Best Regards,
Sho

  • 0
    TI__Mastermind 25500 points

    Hello Sho,

    That isn't something I have seen so waveforms and a schematic would be helpful. I would also like clarification of the issue because the first two sentences describing the issue aren't exactly clear to me. I will send you a direct e-mail.

    Regards,

    Clint