Power supply-TI_E2E.pdfSIM_85V_1.5A.pdfSIM_85V_2A.pdfSIM_85V_2A_airFlow.pdfPart Number: LM5116WG
In reply to Arief Hernadi:
8507.Power supply-TI_E2E.pdf1663.SIM_85V_1.5A.pdf3730.SIM_85V_2A.pdf8510.SIM_85V_2A_airFlow.pdfhi, L3 in my schematic gets hot, which is L1 in the datasheet of LM5116WG
In reply to Muthu Venkat:
What is your inductor temperature? Also what is your VIN when the inductor gets hot.
It could be that you have a lot of ripple. do you have a scope capture of the inductor current waveform?
Our customer complaint about this.It s hot like they can't touch it.The the device we use has this power supply which is in the plastic enclosure. we thought of adding thermal compound to this inductor.
Then we started having voltge fluctuation too. All the details you asked is in the simulation result we provided. Test boards we have in the lab has 11.2V as Vin. If it is ripple then how can we resolve this ?
do u have any particular part # for 15uH or 22 uH
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.