We are using Jacinto board for our usecase. Our setup is Camera -> UB933 -> FPD link -> UB960 -> Jacinto 7.
Whether TDAV board supports V4L2 framework?
How to get the video data from camera using opencv?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We are using Jacinto board for our usecase. Our setup is Camera -> UB933 -> FPD link -> UB960 -> Jacinto 7.
Whether TDAV board supports V4L2 framework?
How to get the video data from camera using opencv?
Hi Muralidharan,
No, Capture using V4L2 is not supported. Please use OpenVX capture node to capture data over CSI interface.
Regards,
Brijesh
This is the data flow given in the vision apps user guide for single camera application. In the source code of single camera application, I can see the code for VISS, LDC and MSC blocks. But I am not able to see the code(API call) for DSS block.
Whether it is getting called indirectly or we have to add the code in single camera application for DSS?
Did not get your question, is it for DSS or camera capture?
There are OpenVX nodes for camera capture as well as for DSS.
Rgds,
Brijesh