• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Subscribers 102 subscribers
  • Views 302 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EVMK2GX: K2G EVM load UBOOT from UART

VinceGads
Prodigy 220 points
Part Number: EVMK2GX
Other Parts Discussed in Thread: UNIFLASH

Hello,

Reading "Platform Development Kit 7_0_0" page,

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/07_00_00_11/exports/docs/pdk_jacinto_07_00_00/docs/userguide/board/uniflash.html

I am understanding from section 6.4.2, that is not possible to load UBOOT in Flash using UART Loader, on the Eval Board K2G EVM. Is it correct?

If so, I suppose the processor K2G does not support it at all ...

thank you,

Vincent