Original question:
TMDSSK3358: How to debug user space application using gdbserver and CCS
In the parent thread, I posted that I can't use gdbserver and CCS.
In this thread, I tried Remote-System-Explore using ssh as follows.
But I got this error as follows.
(I used tisdk-default-image-am335x-evm.tar.xz in the latest SDK for target filesystem.)
Why was error message "Algorithm negotiation fail" displayed ?
I can connect to the target by ssh manually without any problem.
Uegaki-san,
My apologies for the delayed response. I have been looking for information from the Eclipse community but have not had much success.
I did find two posts that may be of interest that may help:
https://hasselba1.rssing.com/chan-13902031/all_p5.html
WARNING: The first post has some questionable advertisement embedded in there, so open with caution. I captured a screenshot of the interesting info in case you don't want to open the page:
I have seen other people use that solution with success.
There is also an other article of use:
This article is actually reference in the first one about the "Unlimited Strength version of Java Crypto Extension". But it doesn't seem to work for everyone (including the person in the first article)
Hope this helps
ki
