Hi,
I cannot view the EMIF16 config register in the ccs memory browser. Is there a limit?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I cannot view the EMIF16 config register in the ccs memory browser. Is there a limit?
Dear Nancy,
As far as I know, there should not be any limit.
You should be able to access the EMIF16 config register.
I ran the sample example on the C6657 EVM and able to monitor the value of EMIF16 register CE0 register(0x70000000) with values E0E0E0E0.
Regards
Shankari
Hi,
Do you have tms320c6678 EVM? And please help try again. Both customer and i can't access from memory browser.
Nancy
The team does not have access to these EVMs yet.
Have you checked if the EMIF16 is properly initialized via GEL file. PSC (refer MDSTAT registers in datasheet Table 7-8 PSC Register Memory Map (Sheet 2 of 3) ) and CE configuration etc?
Regards
Mukul
Have you checked if the EMIF16 is properly initialized via GEL file.
It can be read with CSL code in program.
Where does the EMIF initialization happen in CSL code vs when you are browsing the memory browser ? Can you run the CSL code and then try to access the memory browser ? if you are already doing that , the only other thing i can think of is that what GEL file is used and whether it does the memory map setting appropriately ...
for e.g. here is a snapshot from a K2E Gel file
hotmenu Setup_Memory_Map( )
{
GEL_TextOut("Setup_Memory_Map...\n",,);
GEL_MapOn( );
GEL_MapReset( );
GEL_MapAddStr( 0x00000000, 0, 0x21400000, "R|W|AS4", 0 ); //
GEL_MapAddStr( 0x21400000,0, 0x00000080, "R|W|AS4", 0 ); // Hyperlink Config (remote)
//GEL_MapAddStr( 0x21400080,0, 0x00000080, "R|W|AS4", 0 ); // Hyperlink Config (remote)
GEL_MapAddStr( 0x21400200, 0, 0xdebffe00, "R|W|AS4", 0 ); //
GEL_TextOut( "Setup_Memory_Map... Done.\n" );
}