• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Subscribers 101 subscribers
  • Views 157 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM5718: Sysconfig tool gives an error

Sh.Sasaki
Guru 13625 points
Part Number: AM5718
Other Parts Discussed in Thread: SYSCONFIG,

Hi,

When I run "Start a new Design" with Sysconfig, I get the following error:
I want to know how to deal with this error.

Click "Show Details" to get the following comment.

at XMLHttpRequest.s.onreadystatechange (https://dev.ti.com/sysconfig/ui.js:25:2309)

Best regards,
Sasaki

  • 0
    TI__Expert 6870 points

    Hi,

    • Can you mention the steps you are following, to reproduce the error at our end?
    • Also, why are you using sysconfig, can you also mention your usecase?
    Sh.Sasaki said:
    at XMLHttpRequest.s.onreadystatechange (https://dev.ti.com/sysconfig/ui.js:25:2309)

    The link is not opening, can you give more details?

    • Also, please mention the SDK version and OS(RTOS/Linux) you are using.
  • 0 in reply to ANUBHAV AKASH
    Guru 13625 points

    Hi,

    ANUBHAV AKASH said:
    • Can you mention the steps you are following, to reproduce the error at our end?
    • Also, why are you using sysconfig, can you also mention your usecase?

    Sysconfig is used to set pinmux.

    I get an error when I select AM5718_SR2.x in Sysconfig's "Start a new Design" and click START.

    ANUBHAV AKASH said:
    Also, please mention the SDK version and OS(RTOS/Linux) you are using.

    My sdk is processor_sdk_rtos_am57xx_6_03_00_106 and os is ti-rtos.

    Best regards,
    Sasaki

  • +1 in reply to Sh.Sasaki
    TI__Expert 6870 points

    Hi,

    Sh.Sasaki said:
    I get an error when I select AM5718_SR2.x in Sysconfig's "Start a new Design" and click START.

    It is working fine for me. PFA.

    You can use pinmux tool also.

  • 0 in reply to ANUBHAV AKASH
    Guru 13625 points

    Hi

    Thank you for the information.

    I use pinmux tool.

    Best regards,
    Sasaki