Hi,TI
For example:
why does the timer of SGX find a lockup here?
[ 12.520363] PVR_K:(Error): SGXOSTimer() detected SGX lockup (0x597a tasks)
[ 12.548229] PVR_K: HWRecoveryResetSGX: SGX Hardware Recovery triggered
Through these dump registers, can you explain what the abnormal state?
[ 14.687693] PVR_K: SGX Register Dump:
[ 14.691402] PVR_K: (P0) EUR_CR_CORE_ID: 01191201
[ 14.706134] PVR_K: (P0) EUR_CR_CORE_REVISION: 00010106
[ 14.717340] PVR_K: (P0) EUR_CR_EVENT_STATUS: 243C2F80
[ 14.732868] PVR_K: (P0) EUR_CR_EVENT_STATUS2: 000000A8
[ 14.742895] PVR_K: (P0) EUR_CR_BIF_CTRL: 00000000
[ 14.756581] PVR_K: (P0) EUR_CR_BIF_BANK0: 00000007
[ 14.767538] PVR_K: (P0) EUR_CR_BIF_INT_STAT: 00080000
[ 14.783073] PVR_K: (P0) EUR_CR_BIF_FAULT: 00000000
[ 14.793103] PVR_K: (P0) EUR_CR_BIF_MEM_REQ_STAT: 00000066
[ 14.806616] PVR_K: (P0) EUR_CR_CLKGATECTL: 002AAAAA
[ 14.817570] PVR_K: (P1) EUR_CR_EVENT_STATUS: 00000000
[ 14.833129] PVR_K: (P1) EUR_CR_EVENT_STATUS2: 00000000
[ 14.843203] PVR_K: (P1) EUR_CR_BIF_CTRL: 00000000
[ 14.853282] PVR_K: (P1) EUR_CR_BIF_BANK0: 00000000
[ 14.866258] PVR_K: (P1) EUR_CR_BIF_INT_STAT: 00000000
[ 14.880526] PVR_K: (P1) EUR_CR_BIF_FAULT: 00000000
[ 14.896129] PVR_K: (P1) EUR_CR_BIF_MEM_REQ_STAT: 00000000
[ 14.901565] PVR_K: (P1) EUR_CR_CLKGATECTL: 00000000
For the complete log, please refer to the attachment below