Other Parts Discussed in Thread: SYSCONFIG
Hi TI
There's a request that customer wants to get feedback of schematic review on AM4372 and Power supply.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Jack,
Schematic review requests must be submitted by a TI representative. I recommend reaching out to your rep, asking them to provide the Schematic Review Request form.
Otherwise, specific questions about their implementation can be answered here on the E2E.
Regards,
Mark
Hi Mark
The content was not saved properly in original thread created.
I will update here with appropriate question.
I heard TI SITARA PRODUCT does not provide customer with official schematic review service as of now.
I would ask specific question here with partial area.
BTW. Can you provide a schematic check tool like JACINTO ? Schematic checklist which was uploaed to ti.com is not sufficient for customer demand.
SITARA need to provide check tool for fast design.
Regards,
Jack
Hi Jack,
We will accept schematic review requests for AM437x.Please submit it through your TI representative..
There is no tool like Jacinto, except for SYSCONFIG tool https://dev.ti.com/sysconfig/
Beyond that we have only the checklist: https://www.ti.com/lit/SPRACE0
Regards,
Mark