How to run the UART example on the K2E EVM ( ARM core ) ?
Please post the video, so that it will be easy to run.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How to run the GPIO-LED example on the K2E EVM ( ARM core ) ?
Generate the PDK examples for K2E by following the steps given in this link:-
Set the DIP switch settings of the K2E EVM in "NO BOOT" -- SW1 - 1,2,3,4 -- OFF, OFF, OFF, OFF.
Watch the video, below and follow the steps.