• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 100 subscribers
  • Views 631 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] 66AK2E05: How to run the UART example on the K2E EVM ( ARM core ) ?

Shankari G
Mastermind 23725 points
Part Number: 66AK2E05

Hi,

How to run the UART example on the K2E EVM ( ARM core ) ?

Please post the video, so that it will be easy to run.

  • 0
    TI__Mastermind 23725 points

    How to run the GPIO-LED example on the K2E EVM ( ARM core ) ?

    Pre-requisite:

    1. Install processor_sdk_rtos_k2e_6_03_00_106 from http://software-dl.ti.com/processor-sdk-rtos/esd/K2E/latest/index_FDS.html
    2. Install CCS 9.3 from CCSTUDIO_9.3.0.00012 | TI.com
    3. Choose the installation directory as C:\ti

    Step1:

    Generate the PDK examples for K2E by following the steps given in this link:-

     https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1040858/faq-66ak2e05-how-to-generate-the-ccs-pdk-examples-for-k2e/3849002#3849002

    Step2:

    Set the DIP switch settings of the K2E EVM in "NO BOOT" -- SW1 - 1,2,3,4 -- OFF, OFF, OFF, OFF.

    Watch the video, below and follow the steps.

    Regards

    Shankari G