hello
i have a problem with emac registers address in techniccal reference manual
there is a difference between technical reference manual and dm8148 LINUX PSP
and i want to know what is the correct address of emac registers !
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hello
i have a problem with emac registers address in techniccal reference manual
there is a difference between technical reference manual and dm8148 LINUX PSP
and i want to know what is the correct address of emac registers !
i tried to enable emac rx and rx threshold interrupt by initializing the clock and pincntls and enabling rx and rx threshold interrupt in arm interrupt controller by writing proportional values to their registers
and writing proportional values for emac registers that written in technical reference manual
but i don't receive any interrupt from emac or arm interrupt controller!
then i checked that what is the register address used in dm8148 LINUX PSP ?!
and i think that the technical reference manual register addresses are different with dm8148 LINUX PSP !
i want to know what is the correct address of emac registers??