The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] 66AK2E05: How to load and run the ARM gel file on K2E EVM

Part Number: 66AK2E05

Hi,

How to load and run the ARM gel file on K2E EVM ?

  • Pre-requisite 

    1. Install CCS 9.3 from CCSTUDIO_9.3.0.00012 | TI.com

    -----

    Please follow the steps as per the video, below.

    Regards

    Shankari G