• State
  • Locked Locked
  • Replies 5 replies
  • Subscribers 102 subscribers
  • Views 315 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSEMU560V2STM-UE: TMDSEMU560V2STM-UE

ANIKET SHUKLA
Prodigy 120 points
Part Number: TMDSEMU560V2STM-UE

We ordered TMDSEMU560V2STM-UE and received Blackhawk BH560v2 with orderable part number TMDSEMU560V2STM-UE. Is it the same part as offered by TI and will it be supported by all latest CCS versions like v8 or not?

Only digital spectrum TMDSEMU560V2STM-UE is the correct USB + ethernet STM or the black hawk part is also offered by TI?

  • 0
    TI__Guru**** 159715 points

    In the past when you ordered TMDSEMU560V2STM-UE the product received was manufactured by Spectrum Digital.  However Spectrum Digital is no longer in business so we have replaced it with an equivalent product from Blackhawk that has USB and Ethernet connectivity.  Both are supported by Code Composer Studio on Windows and Linux.

    Regards,

    John

  • 0 in reply to JohnS
    Prodigy 120 points

    Please provide the drivers of the same for CCS v8 as well as provide the BHprobe config utility GUI.

  • 0 in reply to JohnS
    Prodigy 120 points

    the BH-XDS-560v2 (TMDSEMU560v2STM-UE ) is not getting detected in WIn & PC with CCS v8. There is no Bh560v2Config Utility for config and driver installation.Request you to provide the Bh560v2Config Utility and necessary driver files for installation.

  • 0 in reply to JohnS
    Prodigy 120 points

    the BH-XDS-560v2 (TMDSEMU560v2STM-UE ) is not getting detected in WIn & PC with CCS v8. There is no Bh560v2Config Utility for config and driver installation.Request you to provide the Bh560v2Config Utility and necessary driver files for installation.

  • 0 in reply to ANIKET SHUKLA
    TI__Guru**** 420760 points

    Hello,

    The utility should be in:

    <CCS8 INSTALL DIR>\ccsv8\ccs_base\common\uscif

    Run the Bh560v2Config.jar file

    If the file is missing, then it is likely that you did not select the option to install the Blackhawk drivers when installing CCS

    Thanks

    ki