Hi Support Team,
My customer is using DA810 and he need to know the following question.
I think that DA810 is nearly equaled C6747, so I post here as C6747.
It is mentioned in the datasheet that Transition time spec. is as follow.
Recommended Operating Conditions below mention 10%-90%.
However, different part in the datasheet below mention VIL MAX & VIH MIN.
Does it mean for clock signal like SPI1_CLK (input signal), the spec is 0.25P or 10ns
& Transition timing is referenced from VIH MIN and VIL MAX instead of 10%-90% ?
Best regards,
Kanae