This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRA829V-Q1: MCU_BOOTMODE07 Logic

Part Number: DRA829V-Q1
Other Parts Discussed in Thread: DRA829V

Hi Expert,

MCU_BOOTMODE07 in DRA829V is RESERVED and marked "Set to 0 (via pulldown to vss)" in TRM (spruil1c.pdf) 4.3.1. If the logic of MCU_BOOTMODE07 is HIGH due to pullup when POR is released, does this cause problems?

Best Regards,

Morimoto