The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM625: DMSS Ring Accelerator Mapping

Part Number: AM625

The text below is from SPRUIV7 – MAY 2022. Please provide the missing table of ring Accelerator mapping indicated below, or confirm that the mapping ranges do not apply to the AM625

------ DMSS Interrupt Description

This section describes the interrupt-related information that flows within DMSS and how this information is
configured or generated.
1. Ring Number (R#)
• Data is read from and written to a specific Ring Accelerator ring using direct ring-mode, or secure proxy
• The Ring Accelerator has specific ring number ranges for specific purposes. The R# must match
the intended purpose of the ring (see Table 10-578, RINGACC Ring Mapping) <Section under
development: no ring mapping section in spec, need to confirm if it exists in a different place
or just discard this sentence>