PROCESSOR-SDK-AM335X: Failed to rebuild all after the custom board is added

Andy Zhou(Zhou Hong Kun)

I add the custom board(am335x) to SDK according to "3.1.3.6. Creating Board Library with Custom Name" and "3.1.3.7. Creating Custom Board Library for AM335x and AM437x".

It is ok to rebuild board library.C:\ti\pdk_am335x_1_0_17\packages\ti\board>gmake LIMIT_SOCS=am335x LIMIT_BOARDS=myBoard.

But there is two error when rebuild all.(gmake all -j4)

Please help me find the file where the problem is.

Best Regards,

Andy Zhou

over 1 year ago

+1 Jianzhong Xu over 1 year ago

TI__Mastermind 40215 points

Hello Andy,

This is a known issue listed in this E2E post: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1067154/faq-what-are-the-known-issues-of-the-am335x-am437x-processor-sdk-rtos. Please look for workaround under PDK top level build scripts broken for Windows 10.

When adding a new custom board, you only need to rebuild the board library, and don't need to rebuild the PDK.

Please also note that TI has stopped supporting TI-RTOS based or bare-metal SW development for AM335x. Please refer to this announcement and find consolidated resources.

Regards,

Jianzhong

Processors

Processors forum

PROCESSOR-SDK-AM335X: Failed to rebuild all after the custom board is added