AM3505: USB driver for BOOT

Nancy Wang

Part Number: AM3505
Other Parts Discussed in Thread: FLASHTOOL

Hi,

Customer download firmware to AM3505 on USB during boot.There is a USB driver in WIN-XP for connect to AM3505, but it can not used in WIN7. The USB driver is released in 2006, we doubt it can not working in 64-bit system. Can you please help send a new USB driver?

over 1 year ago

0 Nick Saulnier over 1 year ago

TI__Guru 72495 points

Hello Nancy,

Setting expectations: AM35x is too old for us to support on the forums. We no longer have hardware or software expertise on this device.

Does any of this software work for the customer's usecase? https://www.ti.com/product/AM3505#software-development (e.g., flashtool?)

Where did the customer get their USB driver from?

Regards,
Nick

0 wei lai over 1 year ago in reply to Nick Saulnier

Prodigy 20 points

USB driver come from TI FAE in China years ago.We aiso find the driver is same as which from flashtool you said. if you have a new flashtool can working in WIN-64bit, it maybe can help me.

0 wei lai over 1 year ago in reply to Nick Saulnier

Prodigy 20 points

USB driver come from TI FAE in China years ago.We aiso find the driver is same as which from flashtool you said. if you have a new flashtool can working in WIN-64bit, it maybe can help me.

0 Nick Saulnier over 1 year ago in reply to wei lai

TI__Guru 72495 points

Hello Wei Lai,

I am not aware of any more recent versions of the flashtool. Perhaps you can create a virtual machine instance of windows XP to continue using the flashtool driver?

I have attached the user guide for the flashtool (from link https://processors.wiki.ti.com/index.php/Flash_v1.6_User_Guide)

Flash v1.6 User Guide - Texas Instruments Wiki.zip

Regards,

Nick

Processors

Processors forum

AM3505: USB driver for BOOT