Because of the Thanksgiving holiday in the U.S., TI E2E design support forum responses may be delayed the week of Nov. 21. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDA4VM-Q1: TDA4VM-Q1 RESETSTATz pin is not activate.

Part Number: TDA4VM-Q1
Other Parts Discussed in Thread: TDA4VM

In term of TDA4VM, we are making up the PCB board. But RESETSTATz is no active, that means always low.

Looking at other signal such as MCU_PORz_OUT, MCU_RESETSTATz and PORz_OUT are fine.

And MCU_PORz/MCU_RESETz/PORz/RESET_REQz are checked and same design with SDK Board.

Could you advise anything about this phenomenon?