• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 100 subscribers
  • Views 419 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] 66AK2G12: How to load and run the gel file on K2G EVM?

Shankari G
Mastermind 19915 points
Part Number: 66AK2G12

Hi,

How to load and run the gel file on K2G EVM?

  • 0
    TI__Mastermind 19915 points

    Pre-requisite 

    1. Install CCS 9.3 from CCSTUDIO_9.3.0.00012 | TI.com

    2. In 66AK2G12 EVM - board ----> Please keep the DIP Switch settings in "No boot mode"  to connect to the CCS.

      i.e.,  ------> DIP SW3 : 0 0 0 0

    3. Connect the Power cable and the mini-usb for XDS200.
    4. Please follow the steps given in the video below.

    Regards

    Shankari G