• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 100 subscribers
  • Views 215 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRA821U: Firewall disable

Gerald
Genius 9575 points
Part Number: DRA821U

Hi Experts,

Our customer is not able to start the cores on the DRA821U board, as the firewall is enabled.
Is there a method/steps to disable the firewall? If yes, can you please share the steps.
Since the firewall is enabled it's throwing  "firewall exception error" and getting aborted. Need a solution to resolve the exception error.
I hope you can help us. Thank you.

Kind regards,

Gerald

  • 0
    TI__Guru* 93701 points

    Hi Gerald,

    Are there any details on which firewall is being hit?  It could be that the exception is expected and the location / module being accessed should not be.   

    • Is issue being seen on a GP device or HS device?
    • Which SDK is being used?
    • Has customer modified firewall settings.?

    Thanks,

    kb

  • 0 in reply to KB
    TI__Genius 9575 points

    Hi KB,

    Please be informed that customer is running sample application which comes with "ti-processor-sdk-rtos-j7200-evm-08_02_00_05\pdk_j7200_08_02_00_21", file used "sbl_baremetal_smp_test_j7200_evm_mcu1_0TestApp_release.xer5f".

    Execution gets aborted when it try to write with UART, firewall settings havent modified.
    Able to execute core 0 and core 1, but error occurs with core 6.

    I hope you can help us. Thank you.

    Kind regards,

    Gerald

  • 0 in reply to Gerald
    TI__Guru* 93701 points

    Hi Gerald,

    Thank you for providing additional detail.   Still not clear on where in the test application the error is being seen. 

    Is customer able to isolate the error to particular location in the code?  Could the log of the full boot + error be provided?

    Did note the below documentation the J7200 PDK Release notes for SDK 8.2.

    Thanks,

    kb