Please give detail about camera module/development board which I can plug and play with SK-AM62 development board.
Form DTS I found OV5640 is supported but to order and test module I need more information.
Thanks,
Gireesh Hiremath
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Please give detail about camera module/development board which I can plug and play with SK-AM62 development board.
Form DTS I found OV5640 is supported but to order and test module I need more information.
Thanks,
Gireesh Hiremath
Hello Gireesh,
Following 2 CSI camera modules have been tested with the SK-AM62 board. Both work fine.
The default clock frequency for TEVI-OV5640C is 24MHz according to the camera spec. You'll need to modify the device tree overlay and set clock-frequency to <24000000>:
For ALINX AN5641, you can use the existing ov5640 DT overlay as is.
Please refer to the AM62x Linux Academy, specifically the following chapters, for how to use the CSI cameras with the SK-AM62 board: