Hi Support Team,
My customer has a question about the absolute rating of the MIN value of the input voltage during transient of C6747.
The datasheet as shown below lists the absolute ratings for the MAX side, but not the MIN value.
Could you please inform me of the MIN value?
Best Regards,
Kanae
Hello Kanae,
Some of the newer device specify the transient as below. May be you could for now assume the same value unless i make some updates.
https://www.ti.com/lit/ds/symlink/am4372.pdf
Regards,
Sreenivasa
Hello Kanae,
Can you please help me understand what you meant by min value for the transient?
Regards,
Sreenivasa
Hi Sreenivasa,
Thank you for your reply.
The minimum transient value refers to the section of the C6747 datasheet that states the following,
as shown in the table inserted in my previous post.
The information on the site you responded to is for Output voltage ranges: Vo I/O, 3.3V (Transient Overshoot/Undershoot)
in the datasheet, but this inquiry is for Input voltage ranges: Vo I/O, 3.3V (transient).
Is it correct to understand that the above Output voltage ranges: Vo I/O, 3.3V (Transient Overshoot/Undershoot)
and Input voltage ranges: Vo I/O, 3.3V (transient) are calculated in the same way?
If so, does this mean that the MIN value for Input voltage ranges: Vo I/O, 3.3V (transient) is -0.66V?
Best Regards,
Kanae
