TMDSIDK572: SDK

Thilak Ram

Part Number: TMDSIDK572
Other Parts Discussed in Thread: AM5729

Hi,

I am using AM5729 Eval kit and SD Card for booting with Default image and base image from sdk.

I am getting error from the serial console. Please check the attachment of the serial boot data and suggest the reason for it.new board with new linuxsdk card data.doc new board with old rt-linuxsdk card data.doc

0 Josue Zamitiz-Ayala over 3 years ago

Hello Thilak,

You might be getting this error because the SD card might not be properly set up.

Have you tried setting up the SD card using the Linux script provided in the SDK download?

Navigate to the SDK folder then to /bin/ and run the create-sdcard.sh script.

Example: (Can vary depending on where you choose to install the SDK)

user:~$ cd ti-processor-sdk-linux-rt-am57xx-evm-08_02_01_00/bin/
user:~/ti-processor-sdk-linux-rt-am57xx-evm-08_02_01_00/bin$ sudo ./create-sdcard.sh

Follow the prompts and hopefully this will fix the issue.

Please let me know if this helps.

Find further instructions on this thread: e2e.ti.com/.../tmdsidk572-rt-linux-access

0 Josue Zamitiz-Ayala over 2 years ago in reply to Josue Zamitiz-Ayala

This thread will be resolved on the thread mentioned on previous message.

0 Thilak Ram over 2 years ago in reply to Josue Zamitiz-Ayala

Hi,

We are facing the same error in the new eval board. Please suggest any other solution.

Please check the above link. We are following up in that.