• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 101 subscribers
  • Views 117 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DRA829V-Q1: DRA829V-Q1

Goran Stojcevski
Prodigy 100 points
Part Number: DRA829V-Q1
Other Parts Discussed in Thread: DRA829V

Hi,

We need to configure a DRA829V GPIO as a Reference Clock to 40MHz that will clock an external device.

Is that possible and if so which pins should then be configured as a 40MHz reference clock?

Thanks!

Best Regards

Goran

  • 0
    TI__Mastermind 39520 points

    You could use AUDIO_EXT_REFCLK (0, 1, 2, 3) for generating a 40MHz clock.  Another option would be to use a SPI_CLK if a SPI interface is not being used.  Note the clocks are designed to be used as functional reference/interface clocks, not as source clocks for other peripherals. There are no clock specifications (jitter, etc) available for these clocks.