Hello,
We tried to used the switch mode of PRU_ICSSGs. We have the same kernel driver modification as the ones described here : https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1198858/processor-sdk-am64x-pru-ethernet-switch-on-linux-for-am64.
We are using 8.04 PRU switch Firmware.
If we have a host 'X' connected on ICSSG eth1 and a host 'Y' connected on ICSSG eth2. If X is pinging Y, X receives duplicated responses from Y.
Is it a known issue on PRU switch mode of 8.04 SDK ?
Regards,
Rémi