This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

J721EXSOMXEVM: How to check board revision

Part Number: J721EXSOMXEVM

Dear Jacinto champs,


Trying here to get the u-boot DFU to work with the USB Type C connector on the J721EXSOMXEVM

Under the u-boot DFU chapter the documentation specifies that :
"This mode is not supported on J721E Rev E2 and earlier boards“


Based on the Revision history in the schematic and schematic header the latest revision should be E8 but how to be sure?

Could you tell how the revision can be checked on the physical board ? Could you send a picture where to look at on the board for instance ?


Thank you!


Best regards,