OMAPL138B-EP: Custom board

sasi kumar1

Part Number: OMAPL138B-EP
Other Parts Discussed in Thread: OMAPL138

Hi Team,

I am working on the OMAPL138 development board, I am using SATA, EMIFA, USB2.0, and FFT, but most of the examples are available for RTOS only and no tech support is available, kindly tell us which processor could support all these peripheral and protocol and supports RTOS also

10 months ago

0 Mukul Bhatnagar 10 months ago

TI__Guru* 78305 points

Hello SasiKumar

Most of our newer devices do not support SATA.

Please see my older post on a similar query

https://e2e.ti.com/support/processors-group/processors/f/processors-forum/616833/omap-l138-sata-iii-compatability

While AM57x may work for you assuming the price/power is ok for your application , but you may still run into issues on support on TI RTOS components as the support will be limited. Additionally peripherals like USB2 and SATA are better leveraged from Linux side.

You can also reach out to 3Ps like Mistral , LTTS and KPIT , in case they have any custom software services for you to support you on either of these device families with older TI RTOS offering.

Hope this helps

Regards

Mukul

Processors

Processors forum

OMAPL138B-EP: Custom board