The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 158 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SK-AM62: AM62x - Backup Boot with SPI

SK-AM62: Secondary SPI BOOT CONFIGURATION

Doug Plymale
Prodigy 40 points
Part Number: SK-AM62

Hello,

Where can I confirm that the mode 0 and CS0 are used by default in the SPI back up boot configuration?  They are configurable for Primary boot, but there is no reference to what they would be for the backup (Section 5.4.1.4 SPI Boot, page 485 of the Ref manual SPRUIV7B).

Best regards,

Doug