Other Parts Discussed in Thread: PMP, DP83TC811, DP83869, TCA6416, TCA8418, LM8323, LM8333, ADS7846, TSC2004, TSC2005, TSC2007, TPS65219, PCF8574, DRV2665, DRV2667, TPIC2810, LP8727, BQ24190, BQ24257, BQ24735, BQ25890, BQ25980, TPS23861, LM63, LM70, LM73, LM77, LM80, LM83, LM87, LM90, LM92, LM93, LM95234, LM95241, LM95245, ADC128D818, ADS7828, ADS7871, AMC6821, INA209, INA238, INA3221, TMP102, TMP103, TMP108, TMP401, TMP421, TMP464, TMP513, LP3943, TPS65010, TPS65086, TPS65090, TPS65217, TPS65218, TPS65910, TPS65912, TWL6040, LM3533, LP3971, LP3972, TPS51632, TPS62360, TPS65023, TPS65132, LM3560, TLV320AIC23B, TVP5150, TVP7002, THS8200, THS7303, DLPC3433, TFP410, SN65DSI83, SN65DSI86, TPD12S015, LM3630A, LM3639, PCM1681, PCM1789, PCM3060, PCM3168A, PCM5102A, TAS2552, TAS2562, TAS2764, TAS2770, TAS2780, TAS5086, TAS5805M, TAS6424, TLV320AIC23, TS3A227E, TPA6130A2, HD3SS3220, LM3530, LM3532, LM3642, LP3944, DAC124S085, TCA6507, LMK04832, CDCE706, CDCE925, TUSB320, ADC084S021, ADC108S102, ADC128S052, ADC161S626, ADS1015, ADS7950, ADS8344, ADS8688, ADS124S08, ADS131E08, TLC4541, TSC2046, DAC082S085, DAC5571, DAC7311, DAC7612, AFE4403, AFE4404, HDC2010, OPT3001, LMP91000, TMP006, TMP007, TMP117, TUSB1210, CSD
Hey,
I use the SK-TDA4VM with the PROCESSOR-SDK-LINUX-SK-TDA4VM (vers. 09.01.00.06) and I would like to use the Board as a USB gadget.
I enabled configfs and hid function for configs in the linux kernel, but my /sys/class/udc folder is still empty and when I would like to bind the configured usb gadget to the UDC, I will get the Error "write error: Device or resource busy".
What could be the reason for this, do I have to edit the dts or have i forgotten to enable anything?
Best regards,
Tom