TMS320DM8168: Maximum DDR density support

Rohith Ravi

Part Number: TMS320DM8168

Hi,

In our board currently the DDR3 density support/ we are using is 1GB by making use of the DDR0 controller connected to 4 x 8bit DDR3 chips, each with density of 256MB (256MB x 4 = 1GB). We would like to confirm if we can support 2GB density for DDR by replacing the 256MB chips with 512MB chips.

Also what are the changes that needs to be done in software for this DDR size increase.

Thanks & Regards,

Rohith M Ravi

over 1 year ago

0 Charles Tsai over 1 year ago

TI__Guru**** 187176 points

Hi,

Reading the datasheet, it is able to support 2GB.

Please also note that we no longer provide direct support for this device on e2e forum. You may search the E2E forum for archived posts of previous discussions which may help address your questions. Please also feel free to reach out the 3rd parties listed for additional support.

0 Rohith Ravi over 1 year ago in reply to Charles Tsai

Prodigy 160 points

Hi Charles,

Thank you for the support. But the highlighted section in datasheet seems to mention 2Gb (256MB) not 2GB. Is there any way to confirm if we can support 2GB total RAM with our present configuration?

I understand that there will be no direct support from TI for this product and so for future queries we will go to Third Parties listed.

Thanks & Regards,

Rohith M Ravi