SK-AM62A-LP: The SK-AM62A-LP EVM board can't be booted when the master boot mode is set to eMMC boot.

LIN SONGQING

Expert 1395 points

Part Number: SK-AM62A-LP

Tool/software:

Hello TI experts,

We meet an issue:

when we set master boot mode to eMMC boot, the SK-AM62A-LP EVM board can't be booted.

There is no log output on the serial port.

Can you help us analyze it together?

SDK version is 9.1.

Thank you!

Best Regards,

Songqing Lin

3 months ago

0 Prashant Shivhare 3 months ago

TI__Mastermind 41721 points

Hi Lin,

What are the images you have flashed into the eMMC for primary boot?

Regards,

Prashant

0 LIN SONGQING 3 months ago in reply to Prashant Shivhare

Expert 1395 points

Hello Prashant,

We flashed tiboot3.bin into eMMC for primary boot.

Best Regards,

Songqing Lin

0 Prashant Shivhare 3 months ago in reply to LIN SONGQING

TI__Mastermind 41721 points

Hello Lin,

In your previous thread, you mentioned that the eMMC primary boot is working

So, I would like to know what is changed now? Are you now trying a new EVM or something?

Regards,

Prashant

0 LIN SONGQING 3 months ago in reply to Prashant Shivhare

Expert 1395 points

Hello Prashant,

There have a mistake and I updated the information as below. Only in backup mode, it can be booted.

We will try a new EVM and feedback to up later.

Best Regards,

Songqing Lin

0 LIN SONGQING 3 months ago in reply to LIN SONGQING

Expert 1395 points

Hello Prashant,

We found the default boot partition of eMMC is boot1, it cause eMMC boot failed.

We changed the default boot partition of eMMC to boot0, this issue could be resolved.

But we meet another two new issue about eMMC.

I will create new ticket and this ticket can be closed.

Best Regards,

Songqing Lin

0 Prashant Shivhare 3 months ago in reply to LIN SONGQING

TI__Mastermind 41721 points

Thanks for the update, Lin!!

Processors

Processors forum

SK-AM62A-LP: The SK-AM62A-LP EVM board can't be booted when the master boot mode is set to eMMC boot.