TDA4VE-Q1: How to flash with uniflash? Can't find device Name in configuration field.

Osman Polat

Prodigy 10 points

Part Number: TDA4VE-Q1
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

Hi, I would like use uniflash but I can't find the right device.

Is there maybe also a uniflash script *.bat file for this device

5 months ago

0 Osman Polat 5 months ago

Prodigy 10 points

Hi, I found this in an another topic -> " I just found out that TDA4 devices are only supported with the command line interface but is not listed in the GUI."

The question was whether the GUI will support this in the future

0 Keerthy J 5 months ago in reply to Osman Polat

TI__Guru*** 148600 points

Osman,

Yes. There is no plan as of now to support this with GUI.

Best Regards,

Keerthy

0 Osman Polat 5 months ago in reply to Keerthy J

Prodigy 10 points

Keethy,

thank you for quick response, maybe you can say me also if i can get some CLI samples for this device.

0 Karthikeyan S 5 months ago in reply to Osman Polat

TI__Expert 6060 points

Hi,

Osman Polat said:
maybe you can say me also if i can get some CLI samples for this device.

Please refer to the documentation: https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j721s2/09_02_00_05/exports/docs/pdk_j721s2_09_02_00_30/docs/userguide/j721s2/board/uniflash.html and let us know if that helps.

Regards,

Karthik

Processors

Processors forum

TDA4VE-Q1: How to flash with uniflash? Can't find device Name in configuration field.