• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 100 subscribers
  • Views 191 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AM3356: Ethernet Networking Control Model (USBECM) Class Support

sadhan pawar vadegher
Prodigy 10 points
Part Number: AM3356
Other Parts Discussed in Thread: AM1808

Tool/software:

Hi team,

I would like to know if Ethernet Networking Control Model (USBECM) class is supported on this processor. Do you have more complete version of the library? What would you recommend?

Thanks

  • 0
    TI__Mastermind 39650 points

    Hi,

    This is a question that TI will not be able to fully answer. From what I am able to research support for the USBECM would come from enabling a kernel configuration option. I would recommended looking more into CONFIG_USB_F_ECM, this may or may not be what you are looking for. Also note this module is above the SOC drivers that TI supports. 

    Please note again this is a recommendation on further investigation you can do and is not a confirmation that the feature you are looking for is supported.

    Best Regards,

    Schuyler

  • 0 in reply to Schuyler Patton
    Prodigy 10 points

    Hi Shuyler,

    I think you are talking about Linux Kernel configuration. I'm sorry for the confusion. I'm not using Linux Kernel and it's an RTOS. Also, it's not an SOC and we have AM3356x microprocessor board. I have a USB driver with TI copy rights and it's a part of AM1808 StarterWare USB Library reused from stellaris USB library. 

  • 0 in reply to sadhan pawar vadegher
    TI__Mastermind 39650 points

    Hi,

    Thank you for the clarification on the OS you plan to use. TI will not have this library you are looking for with the OS selected for the application. Unfortunately I do not have a 3rd recommendation that I could provide either that might able to provide this support. 

    Best Regards,

    Schuyler

  • 0 in reply to Schuyler Patton
    Prodigy 10 points

    Hi,

    Thank you for your response. I would like to know if you support serial communication USB driver library.