TDA4VH-Q1: How to flash tda4-vh EVK

If there are any flashing documents? tks.

Hi Jin,

What SDK version are you using? Additionally, are you using the RTOS or Linux SDK?

Please take a look at the following documentation on flashing using RTOS PDK Uniflash:

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-j784s4/10_01_00_04/exports/docs/pdk_j784s4_10_01_00_25/docs/userguide/j784s4/board/uniflash.html

Thanks,

Neehar

Hi NeeHar,

     Thank you for your reply. The SDK version is Linux SDK. How to flash imags into UFS ? (TDA4 EVK #pcb: PCB#PROC141E3).

Hi NeeHar,

    Can you provide the DFU flashing tool for TDA4VH？tks.

Hi NeeHar,

     The SD boot pin configuration is as follows. How to configure boot pin for EMMC？tks.

Hi Jin,

Where did you find this documentation? I would recommend looking at the TRM for more in depth information. Please take a look at this snippet from section 4.3.2 in the TRM:

Thanks,

Neehar

Hi Jin,

Following up, is this issue still open?

Thanks,

Neehar