[FAQ] AM62L: LFOSC usage in the device

HI Board designers, 

1. Use cases 

A 32.768 KHz crystal or oscillator is recommended when the processor is configured for 

RTC only mode 

RTC + IO + DDR self-refresh mode

2. Connection when not used 

32.768 KHz crystal or oscillator is optional when low power modes are not used.

Refer LFOSC0 Not Used section of the data sheet to connect the clock input when not used 

3. Using crystal or Oscillator 

Refer LFOSC0 Internal Oscillator Clock Source when crystal is used 

Refer LFOSC0 LVCMOS Digital Clock Source section when using oscillator 

Regards,

Sreenivasa