TDA4VH-Q1: How to use USB to download file-system from HOST ?

Hi Ti expert

Ant suggestions?

Regards
Eason

HI Eason,

I will look into it and get back to you.

Regards

Gokul

Hi Gokul

Any suggestions?

Regards
Eason

Hi Gokul

Any suggestions?

Regards
Eason

Hi Eason,

Sorry for the late reply.

Actually , ufs is not supported on j784s4_evm.It is only supported on j721e_evm

Regards

Gokul

Hi Gokul

Gokul Praveen said:

Actually , ufs is not supported on j784s4_evm.It is only supported on j721e_evm

In J784S4, UFS is supported.

So you just need to guide me, if I want to use USB device in linux to load file system from HOST to linux, we will not use module loading form, but choose to compile directly into the kernel.

Regards
Eason

Hi Gokul

you can see this link:  https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1171750/tda4vm-q1-how-to-configure-ufs-devices-tda4vh

UFS is supported in SDK:0902

Regards
Eason

Hi Gokul

still no update?

Regards
Eason

Hi Gokul

I want to use USB0 by (usb3.0 or usb2.0 mode) to download file from host.

Kernel drivers are not loaded as modules, but are compiled directly into the kernel.

Regards
Eason

Hi Eason,

Sorry for the delay.I have assigned the corresponding expert regarding this issue.Thank you for your patience.

Regards

Gokul

Hello Eason,

USB is something i need to check. Do you have ethernet to download from Host? Is that an option?

We had MMC SD interface which i used on the TI EVM to copy the file system into UFS partition: https://e2e.ti.com/f/791/t/1406714

- Keerthy