Tool/software:
Dear TI Support,
Im working with AM62l3 CPU with a 1gb ddr board . I have updated the ddr related dtsi in the tfa source under the section fdts/"----".dtsi also updated the include section in the dts "k3-am62l-ddr" . Board got booted also , but i ave one doubt regading the bootprints in the dtarting part as shown below.
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v2.12.0(release):11.00.05-dirty
NOTICE: BL1: Built : 05:00:39, Feb 26 2025
NOTICE: lpdd4_init <--
NOTICE: DDR ram size =80000000
NOTICE: bl1_platform_setup DDR init done
NOTICE: k3_bl1_handoff ENTERING WFI - end of bl1
Here the DDR Ram size seems to be still 2GB. Why it is not getting updated .Did i miss something while doing the changes.Could any one please help me through this issue
Thanks,
Dheeraj K