TDA4VM: Inquiry on Suitable PSDK Version for Running QNX 8.0 on SK-TDA4VM

Yoonju Kang

Part Number: TDA4VM

Tool/software:

Hello,

I am currently using the QNX® SDP 8.0 BSP for Texas Instruments Jacinto 7 TDA4VM Starter Kit. According to the BSP release notes, it specifies using the following PSDK RTOS version:

PROCESSOR-SDK-RTOS-J721E 09.02.00.05

Additionally, the PSDK documentation states that the versions of PSDK RTOS and PSDK QNX should match.

However, I cannot find a PSDK QNX release with version 09.02.00.05.

Could you please clarify which version of PSDK QNX should be used in conjunction with QNX SDP 8.0 and the specified PSDK RTOS (09.02.00.05) on the SK-TDA4VM?

Thank you in advance for your support.

2 months ago

+1 Praveen Rao 1 month ago

TI__Mastermind 47253 points

Hello,

We cannot comment on the QNX BSP release notes, and suggest you contact Blackberry QNX for clarification.

From the TI side, we can confirm that the PSDK RTOS and PSDK QNX are not verified to be supported for the TDA4VM-SK board. They are only validated and supported for the TDA4VM EVM boards (J721EXCPXEVM + J721EXSOMXEVM). However, you can use them at your convenience, but we will provide limited support.

See:

https://software-dl.ti.com/jacinto7/esd/processor-sdk-qnx-jacinto7/09_02_00_04/exports/docs/release_notes_09_02_00_j721e.html#device-support-and-validation-information

https://software-dl.ti.com/jacinto7/esd/processor-sdk-rtos-jacinto7/09_02_00_05/exports/docs/psdk_rtos/docs/user_guide/release_notes_09_02_00_j721e.html#hardware-support

Thanks.

The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

Processors

Processors forum

TDA4VM: Inquiry on Suitable PSDK Version for Running QNX 8.0 on SK-TDA4VM