AUDIO-AM62D-EVM: AM62D Issue with NOR Flash Booting on AM62D EVM

TSRDM

Tool/software:

Hi AM62D Team, I tried to enable NOR boot from AM62D-EVM Board, I am able to build the image but it does not work. the short power up log is:

U-Boot SPL 2025.01-00485-g74e16c1e4b41 (June 26 2025 -16:22:47 +0000)

SYSFW ABI: 4.0 (firmware rev 0x000b '11.1.0-v11.01.00 (Fancy Ray)')

SPL initial stack usage: 13568 bytes

SPL: failed to boot from all boot devices

### Error ### Please RESET the board ###

Thank you for your help.

9 months ago

0 Bin Liu 9 months ago

TI__Guru**** 177101 points

Hi,

I am routing your query to our OSPI expert for comments.

0 TSRDM 9 months ago

TI__Prodigy 730 points

Hi TI SPI Expert, when can you reply to this issue?

Thanks, Dave

0 Andreas Dannenberg 8 months ago in reply to TSRDM

TI__Guru 70462 points

Hi Dave,

does this still need attention?

Generally speaking the issues point to one or both of the following:

1. Inappropriate device tree configuration for OSPI boot (including but not limited to potentially missing `bootph-pre-ram` tags on OSPI and FSS related nodes in the R5 U-Boot files

and/or

2. Missing or inappropriate CONFIG options. For this please review this E2E post here (and the follow-up answers) for some guidance: RE: AM62L: NAND/NOR Boot Issues

Regards, Andreas

Processors

Processors forum

AUDIO-AM62D-EVM: AM62D Issue with NOR Flash Booting on AM62D EVM