EVM DM368 Leopard Imaging

Vladimir Khludenkov

Other Parts Discussed in Thread: TMDXEVM368

Hello E2E Members.

We have bought development kit TMDXEVM368 with daughter board Leopard LI-5M02. From link http://support.spectrumdigital.com/boards/evmdm368/revg/ we downloaded sampled for this kit. Unfortunately, there is no samples of using the camera capture with encodeing and video decoding displaying on LCD. We are going to not use the Linux OS due to its slow startup, so for this purpose we are developing a standalone application.
Could you, please, send me some samples on using ISIF, IPIPE, IPIPEIF, VPSS, CODEC blocks of DM368 and CPLD on the Kit. Also, we could not connect with sensor (Leopard LI-5M02) via I2C bus, do you have an idea why it happens and how to fix it?

Thank you in advance.

Kind regards,
Vladimir Khludenkov

over 11 years ago

0 Vladimir Khludenkov over 11 years ago

Prodigy 50 points

Very many thanks for answer on my question. But, unfortunately, all examples from Capture DM368 Leopard Imager for Linux OS using stream video mode (maximal resolution - HD and Full HD). I have to take a one shot with maximal resolution (2592x1944 pixels). Could you tell me, please, how to do it.

Thank you in advance.
Kind regards,
Khludenkov Vladimir.

0 Renjith Thomas over 11 years ago in reply to Vladimir Khludenkov

Guru 31670 points

Vladimir,

What is the startup time that you would like to achieve in your product? Its possible to reduce the boot time of Linux.

Processors

Processors forum

EVM DM368 Leopard Imaging