Beaglebone Black fastboot issues

SANGILI KUMAR

Hello I'm using Beaglebone black. and i followed this link for eMMC flashing via fastboot method http://processors.wiki.ti.com/index.php/AM335x_Android_eMMC_booting

But i'm not getting fastboot command in beagelbone black u-boot prompt, its saying error message that "Command not found try --help" But the same source code working good in beaglebone white fastboot command.

Help me to solve this u-boot fastboot protocol in beagelbone black.

Thanks

Kumar

over 12 years ago

0 idle yeh over 12 years ago

Prodigy 150 points

Hi,

You need to prepare sd card and load the u-boot in that you generated.

Press SW2 then power on to enter u-boot cmd line.

The u-boot on emmc didn't support the fastboot.

FYI

0 Pankaj Bharadiya over 12 years ago in reply to idle yeh

TI__Expert 5400 points

Hi,

Latest rowboat u-boot source has beaglebone black eMMC flashing support.

Clone latest u-boot sources by using below command and follow developer guide for fastboot usage.

$ git clone git://gitorious.org/rowboat/u-boot.git -b am335x-v2013.01.01

Developer Guide:

http://processors.wiki.ti.com/index.php/TI-Android-JB-4.2.2-DevKit-4.1.1_DeveloperGuide#Fastboot

Regards,

Pankaj Bharadiya

Processors

Processors forum

Beaglebone Black fastboot issues