This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The latest RDK version is 3.8.
WDR on AR0331 is supported.
BR,
Eason
Dear,
I work on DM385 release RDK3.8.0,sensor is AR0331 and output 1080P30.
when WDR_ON := YES,do not see image
Provid issdrv_ar0331Api.c and Rules.make
Please guide!
Hi have you ever noticed in hte log, is there any 'timeout' or 'prog exit' prints?
Is the encode running?
Is the window in the browser all black?
please look log.
yes,window is all black.
U-Boot 2010.06 (Jun 23 2014 - 11:57:58) DM385_IPNC_3.80.00
DM385-GP rev 1.1
ARM clk: 600MHz
DDR clk: 533MHz
L3 clk: 200MHz
IVA clk: 450MHz
ISS clk: 400MHz
DSP Default OFF
DSS Default OFF
DRAM: 1 GiB
DCACHE: On
NAND: HW ECC BCH8 Selected
256 MiB
MMC: OMAP SD/MMC: 0, ON-BOARD SDIO: 1
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@ @@
@@ @@
@@ @@
@@ @@
@@ @@@ @. @. @@@@ @@@@ G@@@@@@ @@
@@ @@@@@ L@@ @@@ @@@@@@ @@@@@i @@@@@@ @@
@@ @@ @@@. @@@ @@@ @@ @, @@ :@@ @@
@@ @@ @@ @@@ @@@ @@@@ @@;@@: C@@@@@. @@
@@ @@ @@ @@@.l@L@ G@@@ ,@@@@ @@@ @@ @@
@@ @@ @@ l@ @@@@ @. l@@ @@ L@@ @ G@ @@
@@ @@ @@ @@ @@@@ @@ @@ C@ @@ @@ @@
@@ @@ ,@C @@ @@@ @@ @i @@ C@ @@ @@ @@ @@
@@ @@@@@@@ @@ @@ @@ @@@@@l @@@@@@ L@@@@@ @@
@@ @@@@@ @ @ @ L@@ @@@, ,@@G @@
@@ @@
@@ @@
@@ @@
@@ @@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Net: Ethernet clocking: 0x52
Detected MACID:0:c:c:2:37:c1
cpsw
Hit any key to stop autoboot: 0
Loading from nand0, offset 0x280000
Image Name: Linux-2.6.37_DM385_IPNC_3.80.00
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2483460 Bytes = 2.4 MiB
Load Address: 80008000
Entry Point: 80008000
## Booting kernel from Legacy Image at 81000000 ...
Image Name: Linux-2.6.37_DM385_IPNC_3.80.00
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2483460 Bytes = 2.4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 2.6.37_DM385_IPNC_3.80.00 (root@ubuntu) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 Mon Jun 23 12:06:31 CST 2014
CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: dm385ipnc
vram size = 4194304 at 0x0
bootconsole [earlycon0] enabled
ti81xx_reserve: ### Reserved DDR region @83500000
reserved size = 4194304 at 0x0
FB: Reserving 4194304 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writeback
OMAP chip is DM385 1.0
SRAM: Mapped pa 0x402f1000 to va 0xfe400000 size: 0xf000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12436
Kernel command line: console=ttyO0,115200n8 rootwait=1 rw ubi.mtd=4,2048 rootfstype=ubifs root=ubi0:rootfs init=/init mem=54M vram=4M notifyk.vpssm3_sva=0xBFD00000 ip=192.168.1.168 eth=00:0c:0c:02:37:c1 cmemk.phys_start=0x83600000 cmemk.phys_end=0x85600000 cmemk.allowOverlap=1 earlyprintk
cpsw: kernel boot params Ethernet address: 00:0c:0c:02:37:c1
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 48MB 1MB = 49MB total
Memory: 44296k/44296k available, 11000k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc3800000 - 0xf8000000 ( 840 MB)
lowmem : 0xc0000000 - 0xc3600000 ( 54 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc003e000 ( 216 kB)
.text : 0xc003e000 - 0xc04ba000 (4592 kB)
.data : 0xc04ba000 - 0xc04facc0 ( 260 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:375
IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
Total of 128 interrupts on 1 active controller
GPMC revision 6.0
Trying to install interrupt handler for IRQ368
Trying to install interrupt handler for IRQ369
Trying to install interrupt handler for IRQ370
Trying to install interrupt handler for IRQ371
Trying to install interrupt handler for IRQ372
Trying to install interrupt handler for IRQ373
Trying to install interrupt handler for IRQ374
Trying to install type control for IRQ375
Trying to set irq flags for IRQ375
OMAP clockevent source: GPTIMER1 at 20000000 Hz
Console: colour dummy device 80x30
Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
TI81XX: Map 0x83500000 to 0xfe500000 for dram barrier
TI81XX: Map 0x40300000 to 0xfe600000 for sram barrier
omap_voltage_early_init: voltage driver support not added
regulator: core version 0.5
regulator: dummy:
NET: Registered protocol family 16
omap_voltage_domain_lookup: Voltage driver init not yet happened.Faulting!
omap_voltage_add_dev: VDD specified does not exist!
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
OMAP GPIO hardware version 0.1
omap_mux_init: Add partition: #1: core, flags: 4
Cannot clk_get ck_32
Debugfs: Only enabling/disabling deep sleep and wakeup timer is supported now
registered ti81xx_vpss device
registered ti81xx_vidout device
registered ti81xx on-chip HDMI device
registered ti81xx_fb device
PWM0 init success.
PWM1 init success.
bio: create slab <bio-0> at 0
SCSI subsystem initialized
USBSS revision 4ea2080b
registerd cppi-dma Intr @ IRQ 17
Cppi41 Init Done
omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
tps65910 1-002d: read from reg 3f failed
tps65910 1-002d: read from reg 1e failed
set_machine_constraints: failed to enable VRTC
tps65910 1-002d: failed to register tps65910-pmic regulator
tps65910-pmic: probe of tps65910-pmic failed with error -121
tps65911-rtc tps65911-rtc: rtc core: registered tps65911-rtc as rtc0
tps65910 1-002d: No interrupt support, no core IRQ
Advanced Linux Sound Architecture Driver Version 1.0.23.
Switching to clocksource gp timer
musb-hdrc: version 6.0, peripheral, debug=0
musb-hdrc musb-hdrc.0: dma type: dma-cppi41
MUSB controller-0 revision 4ea20800
usb2phy: computed values rxcalib(15)DACs(27 14 14)
usb2phy: override computed values rxcalib(15)DACs(27 14 14)
usb2phy_config: musb(0) rxcalib done, rxcalib read value 6f6ddd76
musb-hdrc musb-hdrc.0: USB Peripheral mode controller at c381e000 using DMA, IRQ 18
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
PMU: registered new PMU device of type 0
omap-iommu omap-iommu.0: ducati registered
omap-iommu omap-iommu.1: sys registered
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 86
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
CMEMK module: built on Jun 23 2014 at 11:59:41
Reference Linux version 2.6.37
File /work/dm385_3_8/Source/ti_tools/linuxutils_3_23_00_01/packages/ti/sdo/linuxutils/cmem/src/module/cmemk.c
allocated heap buffer 0xc5000000 of size 0x2000000
cmemk initialized
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0
console [ttyO0] enabled, bootconsole disabled
console [ttyO0] enabled, bootconsole disabled
omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
brd: module loaded
loop: module loaded
omap2-nand driver initializing
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xca (Micron NAND 256MiB 3,3V 16-bit)
omap2-nand: detected x16 NAND flash
Creating 8 MTD partitions on "omap2-nand.0":
0x000000000000-0x000000020000 : "U-Boot-min"
0x000000020000-0x000000260000 : "U-Boot"
0x000000260000-0x000000280000 : "U-Boot Env"
0x000000280000-0x0000006c0000 : "Kernel"
0x0000006c0000-0x000006fc0000 : "File System"
0x000006fc0000-0x000007bc0000 : "Data"
0x000007bc0000-0x00000b0c0000 : "File System2"
0x00000b0c0000-0x000010000000 : "Reserved"
UBI: attaching mtd4 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 101
UBI: attached mtd4 to ubi0
UBI: MTD device name: "File System"
UBI: MTD device size: 105 MiB
UBI: number of good PEBs: 840
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 840
UBI: number of PEBs reserved for bad PEB handling: 8
UBI: max/mean erase counter: 2/0
UBI: image sequence number: 7733174
UBI: background thread "ubi_bgt0d" started, PID 41
davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
davinci_mdio davinci_mdio.0: detected phy mask fffffffe
davinci_mdio.0: probed
davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver unknown
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
Linux video capture interface: v2.00
OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
notify_shm_drv: no DSP present (MULTIPROC_INVALIDID)
notify_init : notify drivercreated for remote proc id 1 at physical Address 0xbfd00000
cm: Module associated with clock hdmi_i2s_fck didn't enable in 100000 tries
asoc: tlv320aic3x-hifi <-> davinci-mcasp.1 mapping ok
asoc: HDMI-DAI-CODEC <-> hdmi-dai mapping ok
ALSA device list:
#0: TI81XX EVM
nf_conntrack version 0.5.0 (692 buckets, 2768 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 17
Bridge firewalling registered
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
omap_voltage_late_init: Voltage driver support not added
Power Management for TI81XX.
Detected MACID=0:c:c:2:37:c1
tps65911-rtc tps65911-rtc: hctosys: unable to read the hardware clock
CPSW phy found : id is : 0x4dd074
PHY 0:01 not found
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.1.168, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.168, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 103612416 bytes (101184 KiB, 98 MiB, 816 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing init memory: 216K
Failed to execute /init. Attempting defaults...
INIT: version 2.86 booting
Please wait: booting...
Starting udev
Root filesystem already rw, not remounting
Caching udev devnodes
root: mount: mounting /dev/root on / failed: No such file or directory
Configuring network interfaces... done.
Setting up IP spoofing protection: rp_filter.
rm: cannot remove '/tmp': Device or resource busy
hwclock: RTC_RD_TIME: Remote I/O error
Fri Nov 9 12:48:00 GMT-8 2012
hwclock: RTC_SET_TIME: Remote I/O error
inside finish.sh
UBI: attaching mtd5 to ubi1
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 26
UBI: attached mtd5 to ubi1
UBI: MTD device name: "Data"
UBI: MTD device size: 12 MiB
UBI: number of good PEBs: 96
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 96
UBI: number of PEBs reserved for bad PEB handling: 2
UBI: max/mean erase counter: 2/1
UBI: image sequence number: 705888162
UBI: background thread "ubi_bgt1d" started, PID 267
UBI device number 1, total 96 LEBs (12189696 bytes, 11.6 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
PHY: 0:00 - Link is Up - 100/Full
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 1, volume 0, name "ubifs_volume"
UBIFS: file system size: 10285056 bytes (10044 KiB, 9 MiB, 81 LEBs)
UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 485787 bytes (474 KiB)
UBI: attaching mtd7 to ubi2
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 53
UBI: attached mtd7 to ubi2
UBI: MTD device name: "Reserved"
UBI: MTD device size: 79 MiB
UBI: number of good PEBs: 634
UBI: number of bad PEBs: 0
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 634
UBI: number of PEBs reserved for bad PEB handling: 6
UBI: max/mean erase counter: 43/41
UBI: image sequence number: 241819460
UBI: background thread "ubi_bgt2d" started, PID 280
UBI device number 2, total 634 LEBs (80502784 bytes, 76.8 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 2, volume 0, name "ubifs_volume"
UBIFS: file system size: 78090240 bytes (76260 KiB, 74 MiB, 615 LEBs)
UBIFS: journal size: 3936256 bytes (3844 KiB, 3 MiB, 31 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 3688395 bytes (3601 KiB)
numid=1,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=127,step=0
: values=127,127
| dBscale-min=-63.50dB,step=0.50dB,mute=0
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
SysLink version : 2.21.02.10
SysLink module created on Date:Jun 23 2014 Time:12:07:47
Trace enabled
Trace SetFailureReason enabled
/dev/mem opened.
Phy Addr : 0x48181560 Data : 0x00000002
Unhandled fault: external abort on non-linefetch (0x1018) at 0x401d50e4
Phy Addr : 0x48180f10 Data : 0x00000000
Phy Addr : 0x48180508 Data : 0x00000302
Phy Addr : 0x48180520 Data : 0x00000002
Phy Addr : 0x48180524 Data : 0x00000002
Phy Addr : 0x48180528 Data : 0x00000002
Phy Addr : 0x4c0000e4 Data : 0x00170209
Bus error
[host] Setting DMM priority for [HDVICP0 ] to [1] ( 0x4e000634 = 0x00000009 )
[host] Setting DMM priority for [ISS ] to [0] ( 0x4e000634 = 0x00080000 )
[host] Setting L3 bandwidth regulator for [HDVICP0 ] to [press=[0,0] BW=900, WM Cycles=2500]
[host] Setting L3 bandwidth regulator for [ISS ] to [press=[3,3] BW=400, WM Cycles=2500]
Creat queue id:0
queue id:0
Creat queue id:32769
FileMngThread created
queue id:32769
queue id:32769
AlramThread created
Share memory init success
Creat queue id:65538
queue id:65538
Creat queue id:98307
queue id:98307
IPNC_3.80.00 (root@ubuntu) (gcc version 4.5.3 20110311 (prerelease) (GCC
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
[host] Attached to slave procId 0.
[host] Attached to slave procId 1.
[host] Loaded file ./firmware/ipnc_rdk_fw_m3video.xem3 on slave procId 0.
[host] Started slave procId 0.
[host] After Ipc_loadcallback status [0x00000000]
[host] Loaded file ./firmware/ipnc_rdk_fw_m3vpss.xem3 on slave procId 1.
[host] Started slave procId 1.
[host] After Ipc_loadcallback status [0x00000000]
[m3video] ***** SYSTEM : Frequency <ORG> - 200000000, <NEW> - 200000000
[m3vpss ] ***** SYSTEM : Frequency <ORG> - 200000000, <NEW> - 200000000
[m3video]
[m3vpss ] notify_attach rtnVal 0
[m3video] *** UTILS: CPU KHz = 400000 Khz ***
[m3video]
[m3video] 73: SYSTEM : System Common Init in progress !!!
[m3video] 78: SYSTEM: IPC init in progress !!!
[m3video] 82: SYSTEM: Attaching to [HOST] ...
[m3video] 136: SYSTEM: Attaching to [HOST] ...
[m3video] 158: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
[m3video] 158: SYSTEM: Attaching to [VPSS-M3] ...
[host] After Ipc_startcallback status [0x00000000]
[m3video] 208: SYSTEM: Attaching to [VPSS-M3] ...
[m3vpss ] initProxyServer rtnVal 0
[m3vpss ]
[m3vpss ] *** UTILS: CPU KHz = 400000 Khz ***
[m3vpss ]
[m3vpss ] 182: SYSTEM : System Common Init in progress !!!
[m3vpss ] 182: SYSTEM: IPC init in progress !!!
[m3vpss ] 182: SYSTEM: Attaching to [HOST] ...
[m3vpss ] 232: SYSTEM: Attaching to [HOST] ...
[m3vpss ] 235: SYSTEM: Attaching to [HOST] ... SUCCESS !!!
[m3vpss ] 235: SYSTEM: Attaching to [VIDEO-M3] ...
[host] After Ipc_startcallback status [0x00000000]
[m3video] 258: SYSTEM: Attaching to [VPSS-M3] ...
[m3vpss ] 285: SYSTEM: Attaching to [VIDEO-M3] ...
[m3video] 286: SYSTEM: Attaching to [VPSS-M3] ... SUCCESS !!!
[m3vpss ] 286: SYSTEM: Attaching to [VIDEO-M3] ... SUCCESS !!!
[m3video] 286: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
[m3vpss ] 286: SYSTEM: Creating MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
[m3vpss ] 286: SYSTEM: Creating MsgQ [VPSS-M3_MSGQ] ...
[m3vpss ] 287: SYSTEM: Creating MsgQ [VPSS-M3_ACK_MSGQ] ...
[m3vpss ] 289: SYSTEM: Notify register to [HOST] line 0, event 12 ...
[m3vpss ] 289: SYSTEM: Notify register to [VIDEO-M3] line 0, event 12 ...
[m3vpss ] 289: SYSTEM: IPC init DONE !!!
[m3vpss ] Received character 's'
[m3vpss ] 300: MEM: Shared Region 2: Base = 0xbb900000, Length = 0x02900000 (41 MB)
[m3vpss ] 300: MEM: Shared Region 1: Base = 0xbe500000, Length = 0x01500000 (21 MB)
[m3vpss ] 303: SYSTEM : System Common Init Done !!!
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
[m3video] 386: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
[m3video] 387: SYSTEM: Creating MsgQ [VIDEO-M3_MSGQ] ...
[m3video] 387: SYSTEM: Creating MsgQ [VIDEO-M3_ACK_MSGQ] ...
[m3video] 389: SYSTEM: Notify register to [HOST] line 0, event 12 ...
[m3video] 389: SYSTEM: Notify register to [VPSS-M3] line 0, event 12 ...
[m3video] 389: SYSTEM: IPC init DONE !!!
[m3video] 400: MEM: Shared Region 2: Base = 0xbb900000, Length = 0x02900000 (41 MB)
[m3video] 400: MEM: Shared Region 1: Base = 0xbe500000, Length = 0x01500000 (21 MB)
[m3video] 402: SYSTEM : System Common Init Done !!!
[m3video] Received character 's'
queue id:65538
Creat queue id:131076
queue id:131076
CPU is TI812x
*****************************************************************
IPNC BUILD VERSION: IPNC RDK VERSION 03.80.00.05 (FULL FEATURE)
*****************************************************************
Error: SemWait: Invalid Semaphore handler
Error: SemRelease: Invalid Semaphore handler
DEMOCFG Value : 0
Videocodecmode : 8
Videocodecres : 0
streamtype : 2
vsenable : 0
./bin/ipnc_rdk_mcfw.out VNF_QUALITY TRISTREAM TRIPLE_H264 TI2A AWB 1080P_D1 H264 HIGH_SPEED1 H264 HIGH_SPEED2 MJPEG 80 &
Creat queue id:163845
queue id:163845
queue id:65538
ApproDrvInit: 7
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
queue id:163845
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
[m3video] 602: SYSTEM : System Video Init in progress !!!
[m3vpss ] 602: SYSTEM : System VPSS Init in progress !!!
[m3video] 603: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_0] in region 0 ...
[m3video] 603: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_0] in region 0 ...
[m3video] 604: SYSTEM: ListElem Shared Addr = 0xbe284180
[m3video] 606: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_1] in region 0 ...
[m3video] 606: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_1] in region 0 ...
[m3video] 606: SYSTEM: ListElem Shared Addr = 0xbe287680
[m3video] 616: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_29] in region 0 ...
[m3vpss ] === I2C0/2 Clk is active ===
[m3video] 616: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_29] in region 0 ...
[m3vpss ] PLATFORM: UNKNOWN CPU detected, defaulting to VPS_PLATFORM_CPU_REV_1_0
[m3video] 617: SYSTEM: ListElem Shared Addr = 0xbe28ab80
[m3vpss ] PLATFORM: UNKNOWN CPU detected, defaulting to ISS_PLATFORM_CPU_REV_2_1
[m3video] 619: SYSTEM: Creating ListMP [VIDEO-M3_IPC_OUT_30] in region 0 ...
[m3vpss ] 621: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_0] in region 0 ...
[m3video] 619: SYSTEM: Creating ListMP [VIDEO-M3_IPC_IN_30] in region 0 ...
[m3vpss ] 622: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_0] in region 0 ...
[m3video] 620: SYSTEM: ListElem Shared Addr = 0xbe2a4800
[m3vpss ] 622: SYSTEM: ListElem Shared Addr = 0xbe2be480
[m3video] 622: HDVICP: Doing PRCM for IVAHD[0] ...
[m3video] 622: HDVICP: PRCM for IVAHD[0] ... DONE.
[m3video] 623: SYSTEM : Initializing Links !!!
[m3vpss ] 624: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_1] in region 0 ...
[m3vpss ] 625: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_1] in region 0 ...
[m3video] 623: SYSTEM : FREE SPACE : System Heap = 2088976 B, Mbx = 10240 msgs)
[m3vpss ] 626: SYSTEM: ListElem Shared Addr = 0xbe2c1980
[m3video] 623: SYSTEM : FREE SPACE : SR0 Heap = 2354304 B (2 MB)
[m3vpss ] 639: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_24] in region 0 ...
[m3vpss ] 639: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_24] in region 0 ...
[m3video] 624: SYSTEM : FREE SPACE : Frame Buffer = 42991488 B (40 MB)
[m3vpss ] 640: SYSTEM: ListElem Shared Addr = 0xbe2c4e80
[m3vpss ] 642: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_25] in region 0 ...
[m3video] 624: SYSTEM : FREE SPACE : Bitstream Buffer = 22019968 B (20 MB)
[m3vpss ] 643: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_25] in region 0 ...
[m3video] 624: SYSTEM: Opening MsgQ [VPSS-M3_MSGQ] ...
[m3vpss ] 643: SYSTEM: ListElem Shared Addr = 0xbe2e4880
[m3video] 625: SYSTEM : FREE SPACE : Tiler Buffer = 57 B (0 MB) - TILER OFF
[m3vpss ] 645: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_26] in region 0 ...
[m3vpss ] 646: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_26] in region 0 ...
[m3video] Entered the MctnfLink_init()
[m3vpss ] 646: SYSTEM: ListElem Shared Addr = 0xbe304280
[m3vpss ] 652: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_29] in region 0 ...
[m3vpss ] 653: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_29] in region 0 ...
[m3vpss ] 653: SYSTEM: ListElem Shared Addr = 0xbe323c80
[m3vpss ] 655: SYSTEM: Creating ListMP [VPSS-M3_IPC_OUT_30] in region 0 ...
[m3vpss ] 656: SYSTEM: Creating ListMP [VPSS-M3_IPC_IN_30] in region 0 ...
[m3vpss ] 656: SYSTEM: ListElem Shared Addr = 0xbe33d900
[m3vpss ] 658: SYSTEM : HDVPSS Drivers Version: HDVPSS_01_00_01_37
[m3vpss ] 658: SYSTEM : FVID2 Init in progress !!!
[m3video] 681: SYSTEM : Initializing Links ... DONE !!!
[m3video] 681: SYSTEM : System Video Init Done !!!
[m3vpss ] 728: SYSTEM : FVID2 Init in progress DONE !!!
[m3vpss ] 728: SYSTEM : Device Init in progress !!!
[m3vpss ] Iss_init called !!!!!!
[m3vpss ] CPIS_init DONE !!!!!!
[m3vpss ] initPrms.isI2cInitReq = 1
[m3vpss ] initPrms.isI2cInitReq = 0
[m3vpss ] 852: SYSTEM : Device Init in progress DONE !!!
[m3vpss ] 922: SYSTEM : System VPSS Init Done !!!
[m3vpss ] 922: UTILS: DMA: HWI Create for INT62 !!!
[m3vpss ] 922: SYSTEM : Initializing Links !!!
[m3vpss ] 922: SYSTEM : FREE SPACE : System Heap = 1682704 B, Mbx = 10240 msgs)
[m3vpss ] 923: SYSTEM : FREE SPACE : SR0 Heap = 1740928 B (1 MB)
[m3vpss ] 923: SYSTEM : FREE SPACE : Frame Buffer = 38681472 B (36 MB)
[m3vpss ] 923: SYSTEM : FREE SPACE : Bitstream Buffer = 22019968 B (20 MB)
[m3vpss ] 924: SYSTEM : FREE SPACE : Tiler Buffer = 57 B (0 MB) - TILER OFF
[m3vpss ] 1051: SYSTEM : Initializing Links ... DONE !!!
[m3vpss ] Received character 't'
[c6xdsp ] Remote Debug Shared Memory @ 0xbff00000
[m3video] Remote Debug Shared Memory @ 0xbff05020
[m3vpss ] Remote Debug Shared Memory @ 0xbff0a040
[m3video] Received character 't'
DMA: Module install successful, device major num = 247
DRV: Module install successful
DRV: Module built on Jun 23 2014 14:21:56
HDMI W1 rev 4.0
HDMI CEC Spec version 1.2
I2C No Ack
HDMI failed to read E-EDID
[host]
[host] ORG 0x46c00524: 0
[host] NEW 0x46c00524: 2
[host]
[host] Application Start Completed
[host] 0: SYSTEM: System Common Init in progress !!!
[host] 0: SYSTEM: IPC init in progress !!!
[host] 16: SYSTEM: CPU [DSP] is NOT available on this platform !!!
[host] 17: SYSTEM: CPU [VIDEO-M3] syslink proc ID is [0] !!!
[host] 17: SYSTEM: CPU [VPSS-M3] syslink proc ID is [1] !!!
[host] 17: SYSTEM: CPU [HOST] syslink proc ID is [2] !!!
[host] 17: SYSTEM: Opening MsgQ Heap [IPC_MSGQ_MSG_HEAP] ...
[host] 19: SYSTEM: Creating MsgQ [HOST_MSGQ] ...
[host] 21: SYSTEM: Creating MsgQ [HOST_ACK_MSGQ] ...
[host] 22: SYSTEM: Opening MsgQ [VIDEO-M3_MSGQ] ...
[hDMA: ChannelID allocated:4
ost] 23: SYSTEMDMA: ChannelID allocated:5
: Opening MsgQ [VPSS-M3_MSGQ] ...
[host] 25: SYSTEM: Notify register to [VIDEO-M3] line 0, event 12 ...
[host] 26: SYSTEM: Notify register to [VPSS-M3] line 0, event 12 ...
[host] 26: SYSTEM: IPC init DONE !!!
[host] 31: SYSTEM: Creating ListMP [HOST_IPC_OUT_29] in region 0 ...
[host] 33: SYSTEM: Creating ListMP [HOST_IPC_IN_29] in region 0 ...
[host] 35: SYSTEM: ListElem Shared Addr = 0x40f04580
[host] 36: SYSTEM: Creating ListMP [HOST_IPC_OUT_30] in region 0 ...
[host] 38: SYSTEM: Creating ListMP [HOST_IPC_IN_30] in region 0 ...
[host] 39: SYSTEM: ListElem Shared Addr = 0x40f1e200
[host] 42: SYSTEM: Creating ListMP [HOST_IPC_OUT_24] in region 0 ...
[host] 44: SYSTEM: Creating ListMP [HOST_IPC_IN_24] in region 0 ...
[host] 46: SYSTEM: ListElem Shared Addr = 0x40f37e80
[host] 47: SYSTEM: Creating ListMP [HOST_IPC_OUT_25] in region 0 ...
[host] 49: SYSTEM: Creating ListMP [HOST_IPC_IN_25] in region 0 ...
[host] 50: SYSTEM: ListElem Shared Addr = 0x40f57880
[host] 51: SYSTEM: Creating ListMP [HOST_IPC_OUT_26] in region 0 ...
[host] 53: SYSTEM: Creating ListMP [HOST_IPC_IN_26] in region 0 ...
[host] 55: SYSTEM: ListElem Shared Addr = 0x40f77280
[host] 56: SYSTEM: System Common Init Done !!!
[host] Vsys_allocBuf - addr = 0x495c6000,size = 31457280
##########pInfo->totalsize 30343168
[host] MemMng_memcpy_open:OSA_dmaOpen passed with ch id = 4
[host] CacheMng_MemCpy_open:OSA_dmaOpen passed with ch id = 5
[host] MCFW_IPCFRAMES:App_ipcFramesSendRecvFxn:Entered...
[host] Vsys_allocBuf - addr = 0x4c5b4000,size = 33603
[host] DCC buffer allocated for size 33603
[host] DCC Default File Intialization Done
[host] Before System_linkControl SYSTEM_M3VPSS_CMD_GET_DISPLAYCTRL_INIT
[m3vpss ] tiedVencs VPS_DC_VENC_HDMI | VPS_DC_VENC_HDCOMP
[m3vpss ] VPS_DCTRL_INST_0
[m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_OUTPUT SYSTEM_DC_VENC_DVO2
[m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_OUTPUT SYSTEM_DC_VENC_HDMI
[m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_OUTPUT SYSTEM_DC_VENC_SD
[m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_OUTPUT SYSTEM_DC_VENC_HDCOMP
[m3vpss ] IOCTL_VPS_DCTRL_SET_VENC_CLK_SRC VPS_DC_VENC_HDMI | VPS_DC_VENC_HDCOMP
[m3vpss ] HDCOMPCLK
[host]
********** FULL FEATURE USECASE ********
[host] ********* Entered Tri Streaming usecase - H264 1080p @60fps + H264 D1 @30fps + MJPEG 1080p @5fps ********
[host] 148: MCFW : CPU Revision [ES1.0] !!!
[host] 148: MCFW : Detected [4x TVP5158 VS] Board !!!
[host] 148: MCFW : Base Board Revision [REV A] !!!
[host] 148: MCFW : Daughter Card Revision [REV A] !!!
[m3vpss ] 2128: CAMERA: Create in progress !!!
[m3vpss ] Channel Num Stream 0 Ch 0 ChannelNum 0
[m3vpss ] Channel Num Stream 1 Ch 0 ChannelNum 1
[m3vpss ] 2129: CAMERA: VIP0 PortA camera mode is [ 8-bit, Non-mux Embedded Sync] !!!
[m3vpss ] 2129: CAMERA: VIP 0: VID DEC 268436737 (0x10): 0002:20202020:20202020, AUD_STATUS 538976288
[m3vpss ] Iss_captCreate:1661
[m3vpss ] 2268: CAMERA: Create Done !!!
[m3vpss ] 2357: CAMERA: Detect video in progress !!!
[m3vpss ] 2357: CAMERA: Detect video Done !!!
[m3vpss ] 2543: DUP : Create Done !!!
[m3vpss ] 2363: VNF:
[m3vpss ] Create in progress ... !!!
[m3vpss ] 2364: VNF:
[m3vpss ] Input Channel CH0 of 1952 x 1112, pitch = (1984, 1984) [0,0][PROGRESSIVE] [7] ...
[m3vpss ] 2364: VNF:
[m3vpss ] [VNF] eOperateMode=6 [6-TNF3,7-NSF2]chVnfCreateParams->ulStartX = 0 chVnfCreateParams->ulStartY = 0 chVnfCreateParams->ulInputStride = 1984 chVnfCreateParams->ulInputWidth=1952,chVnfCreateParams->ulInputHeight=1112
[m3vpss ] 2505: VNF:
[m3vpss ] [VNF] outChInfo->StartX = 0 outChInfo->startY = 0 outChInfo->pitch[0] = 1952 outChInfo->width=1920,outChInfo->height=1080
[m3vpss ] 2507: VNF:
[m3vpss ] Create ... DMA: ChannelID allocated:6
DONE !!!
[m3vpDMA: ChannelID allocated:7
ss ] 2694: DUP : Create Done !!!
[m3vpss ] 2700: DUP : Create Done !!!
[m3vpss ] DCC server task running
[m3vpss ] 2703: Mux : Creating... !!!
[m3vpss ] 2705: Mux : Create Done !!!
[m3vpss ] {SWOSD} edma3Handle->tccVal = 36
[m3vpss ] {SWOSD} edma3Handle->chId = 36
[host] Vsys_eventHandler:OSA_dmaOpen passed with ch id = 6
[m3vpss ] {SWOSD} edma3Handle->tccVal = 37
[m3vpss ] {SWOSD} edma3Handle->chId = 37
[m3vpss ] {SWOSD} edma3Handle->tccVal = 38
[m3vpss ] {SWOSD} edma3Handle->chId = 38
[m3vpss ] 2715: SYSTEM: Opening MsgQ [HOST_MSGQ] ...
[host] Vsys_eventHandler:OSA_dmaOpen passed with ch id = 7
[m3vpss ] 2593: SWOSD : Create Done !!!
[m3vpss ] 2779: DUP : Create Done !!!
DMA: ChannelID allocated:8
[m3vpss ] 2780: SCLR: Create in progress !!!
[host] Vsys_eventHandler:OSA_dmaOpen passed with ch id = 8
[m3vpss ] 2784: SCLR : Loading Up-scaling Co-effs ...
[m3vpss ] 2784: SCLR : Co-effs Loading ... DONE !!!
[m3video] 2795: IPC_IN_M3 : Create in progress !!!
[m3video] 2796: SYSTEM: Opening ListMP [VPSS-M3_IPC_OUT_0] ...
[m3vpss ] SCLR:HEAPID:0 USED:64
[m3video] 2796: SYSTEM: Opening ListMP [VPSS-M3_IPC_IN_0] ...
[m3vpss ] SCLR:HEAPID:1 USED:5952
[m3video] 2799: IPC_IN_M3 : Create Done !!!
[m3vpss ] 2785: SCLR: Create Done !!!
[m3video] 2799: ENCODE: Create in progress ... !!!
[m3vpss ] 2612: FD : Alg Create Done !!!
[m3vpss ] 2613: FD : Create Done !!!
[m3vpss ] 2794: IPC_OUT_M3 : Create in progress !!!
[m3vpss ] 2795: IPC_OUT_M3 : Create Done !!!
[m3video] 2925: ENCODE: Creating CH0 of 1920 x 1080, pitch = (1952, 1952) [PROGRESSIVE] [NON-TILED ], bitrate = 8000 Kbps ...
[m3video] ENCLINK_H264:HEAPID:0 USED:13272
[m3video] 3009: ENCODE: Creating CH1 of 720 x 480, pitch = (720, 720) [PROGRESSIVE] [NON-TILED ], bitrate = 8000 Kbps ...
[host] IpcBitsInLink_tskMain:Entered
[host] 942: IPC_BITS_IN : Create in progress !!!
[host] 942: IPC_BITS_IN : ListMPOpen start !!!
[host] 942: SYSTEM: Opening ListMP [VIDEO-M3_IPC_OUT_29] ...
[host] 944: SYSTEM: Opening ListMP [VIDEO-M3_IPC_IN_29] ...
[host] 945: IPC_BITS_IN : ListMPOpen done !!!
[host] 946: IPC_BITS_IN : System_linkGetInfo done !!!
[host] 947: IPC_BITS_IN : Create Done !!!
[host] USECASE SETUP DONE
[m3video] ENCLINK_H264:HEAPID:0 USED:11720
[m3vpss ] 3106: DISPLAY: Create in progress !!!
[m3video] 3093: ENCODE: Creating CH2 of 1920 x 1080, pitch = (1952, 1952) [PROGRESSIVE] [NON-TILED ], bitrate = 100 Kbps ...
[m3vpss ] DisplayId = 1,DataFormat = 7
[m3vpss ] SC2 displayInstId = 6
[m3vpss ] 3107: DISPLAY: Create Done !!!
[m3video] ENCLINK_JPEG:HEAPID:0 USED:4368
[m3vpss ] 3108: DISPLAY: Create in progress !!!
[m3video] 3094: ENCODE: All CH Create ... DONE !!!
[m3vpss ] DisplayId = 4,DataFormat = 7
[m3vpss ] SD displayInstId = 2
[m3vpss ] 3109: DISPLAY: Create Done !!!
[m3video] ENCLINK:HEAPID:0 USED:29688
[m3vpss ] 3111: DISPLAY: Start in progress !!!
[m3video] 3097: ENCODE: Create ... DONE !!!
[m3video] 3029: VSTAB : Alg Create Done !!!
[m3video] 3029: VSTAB : Create Done !!!
[m3video] 3098: IPC_BITS_OUT : Create in progress !!!
[m3video] 3100: IPC_BITS_OUT : Create Done !!!
[m3vpss ] 3172: DISPLAY: Start Done !!!
[m3vpss ] 3172: DISPLAY: AUX PATH: 32 fps, Latency (Min / Max) = ( 255 / 0 ), Callback Interval (Min / Max) = ( 255 / 0 ) !!!
[m3vpss ] 3172: DISPLAY: Start in progress !!!
[m3vpss ] 3239: DISPLAY: Start Done !!!
[m3vpss ] 3239: DISPLAY: SDDAC(SEC1): 14 fps, Latency (Min / Max) = ( 255 / 0 ), Callback Interval (Min / Max) = ( 255 / 0 ) !!!
[m3vpss ] 3060: CAMERA: Start in progress !!!
[m3vpss ] WDR Enabled!!!!!!!!!!!!!
[m3vpss ] 3061: CAMERA: Start Done !!!
[host]
Application Run Completed
[host] ITT server task running !!!
[host]
ITT ittServer_run
[host] ITT Server Message initialization successful
[host]
ITT capture task created
[host] DCC server Message ques is open succefully
[host] Setting cmd <1> in message <40db0c00>
[host] Posting message <40db0c00> in QId <10002>
[m3vpss ] Command 1 recived from HOST A8
[host] Response from M3 is : 1
[host] Response from M3 is : 1
[host] Default parameters were sent sucessfully
[host] Server Socket created with ID <22>
[m3vpss ] Command 2 recived from HOST A8
[m3vpss ] New DCC data of size <33603>
[m3vpss ] Call to VNF_LINK_CMD_UPDATE_DCC 536870980
INIT: Entering runlevel: 5
inside autorun
sbulla: unknown partition table
Starting telnet daemon sbulla: unknown partition table
.
Starting syslogd/klogd: done
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project http://arago-project.org DM385_IPNC ttyO0
Arago 2011.09 DM385_IPNC ttyO0
DM385_IPNC login: root (automatic login)
root@DM385_IPNC:~# mkdosfs 3.0.12 (29 Oct 2011)
unable to get drive geometry, using default 255/63
/dev/sbulla has 255 heads and 63 sectors per track,
logical sector size is 512,
using 0xf8 media descriptor, with 1024 sectors;
file system has 2 12-bit FATs and 4 sectors per cluster.
FAT size is 1 sector, and provides 247 clusters.
There is 1 reserved sector.
Root directory contains 512 slots and uses 32 sectors.
Volume ID is b0faf50b, no volume label.
g_file_storage gadget: No serial-number string provided!
g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
g_file_storage gadget: Number of LUNs=1
g_file_storage gadget-lun0: ro=0, nofua=0, file: /dev/sbulla
Simple mixer control 'PGA',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 119
Front Left: Capture 80 [67%] [40.00dB] [on]
Front Right: Capture 80 [67%] [40.00dB] [on]
queue id:0
./boa: /usr/lib/libssl.so.1.0.0: no version information available (required by ./boa)
./boa: /usr/lib/libcrypto.so.1.0.0: no version information available (required by ./boa)
ApproDrvInit: 3
queue id:163845
queue id:0
queue id:32769
queue id:0
TimeOut occure in boot_proc.
Program exit.
TimeOut occure in boot_proc.
Program exit.
[host]
Usecase is Active !!!
[host]
Usecase is Active !!!
ApproDrvExit: 7
Error: WaitStreamReady Fail.
Error: SemWait: Invalid Semaphore handler
Error: SemRelease: Invalid Semaphore handler
Error: SemWait: Invalid Semaphore handler
[host]
Force IDR on Channel: 0
[host]
Force IDR on Channel: 1Error: SemRelease: Invalid Semaphore handler
SystemInit success
Schedule manager init success
Dmva Schedule manager init success
umount: can't umount /mnt/mmc: Invalid argument
killall: dhcpcd: no process killed
rm: cannot remove '/var/run/dhcpcd-eth0.pid': No such file or directory
net_search_gateway:eth0, 1A8C0, 0, 1
dns=192.168.1.1
net_search_gateway:eth0, 1A8C0, 0, 1
net_search_gateway:eth0, 0, FE01A8C0, 3
dns=192.168.1.1
g_file_storage gadget: No serial-number string provided!
g_file_storage gadget: File-backed Storage Gadget, version: 1 September 2010
g_file_storage gadget: Number of LUNs=1
g_file_storage gadget-lun0: ro=0, nofua=0, file: /dev/sbulla
[09/Nov/2012:04:48:19 +0000] boa: server version Boa/0.94.13
[09/Nov/2012:04:48:19 +0000] boa: server built Jun 23 2014 at 14:18:05.
[09/Nov/2012:04:48:19 +0000] boa: starting server pid=567, port 80
queue id:0
<UDN>uuid:Upnp-TVEmulator-1_0-00_0023627307</UDN>
Upnp port is 0
UPnP Initialized OK ip=192.168.1.224, port=0
desc_doc_url = http://192.168.1.224/tvdevicedesc.xml
error code = 0
device advertisement succeed.
queue id:131076
ApproDrvInit: 9
queue id:163845
Initializing...
ApproDrvInit: 10
queue id:163845
Initializing...
...done initializing
Play this stream using the URL:
rtsp://192.168.1.224:8557/PSIA/Streaming/channels/2?videoCodecType=H.264
(We use port 8304 for optional RTSP-over-HTTP tunneling.)
ApproDrvInit: 6
queue id:163845
Initializing...
...done initializing
ApproDrvInit: 2
queue id:163845
Initializing...
...done initializing
ApproDrvInit: 8
queue id:163845
Initializing...
...done initializing
...done initializing
Play this stream using the URL:
rtsp://192.168.1.224:8555/PSIA/Streaming/channels/0?videoCodecType=MJPEG
(We use port 8302 for optional RTSP-over-HTTP tunneling.)
Play this stream using the URL:
rtsp://192.168.1.224:8553/PSIA/Streaming/channels/1?videoCodecType=MPEG4
(We use port 8300 for optional RTSP-over-HTTP tunneling.)
Play this stream using the URL:
rtsp://192.168.1.224:8554/PSIA/Streaming/channels/1?videoCodecType=MPEG4
(We use port 8301 for optional RTSP-over-HTTP tunneling.)
Play this stream using the URL:
rtsp://192.168.1.224:8556/PSIA/Streaming/channels/2?videoCodecType=H.264
(We use port 8303 for optional RTSP-over-HTTP tunneling.)
in [onvif] soap_serve_request ....Probe...
in [onvif] soap_serve_request ....Probe...
[host]
Usecase is Active !!!
in [onvif] soap_serve_request ....Probe...
in [onvif] soap_serve_request ....Probe...
[host]
Usecase is Active !!!
Stream 2 is not avaliable~~~~~~~~
caught SIGTERM: shutting down
ApproDrvExit: 10
in [onvif] soap_serve_request ....Probe...
in [onvif] soap_serve_request ....wsd:Probe...
in [onvif] soap_serve_request ....wsd:Probe...
buffer flush: Destination address required
[host]
Usecase is Active !!!
in [onvif] soap_serve_request ....Probe...
in [onvif] soap_serve_request ....Probe...
queue id:32769
queue id:32769
[host]
Usecase is Active !!!
queue id:32769
in [onvif] soap_serve_request ....Probe...
in [onvif] soap_serve_request ....Probe...
in [onvif] soap_serve_request ....wsdd:Probe...
[09/Nov/2012:04:51:38 +0000] caught SIGSEGV, dumping core in /tmp/nand
[host]
Usecase is Active !!!
[host]
Usecase is Active !!!
[host]
Usecase is Active !!!
[host]
Usecase is Active !!!
[host]
Usecase is Active !!!
Both mctnf & WDR on? Either of them can be on, but not together. Would you have a try.
My Rulse.make change config :
WDR_ON := YES
#WDR_ON := NO
DMVA3_VNF_MODE := TNF3
#DMVA3_VNF_MODE := MCTNF
but window is all black.
I have confirmed that this setup doesnt work for me... So I think there should be something wrong but I am not able to figure it out.
It might need some time to find out why, i will update later...
BR,
Eason
Hi,
I was also getting the same image, Video stream was black when WDR_ON flag is YES in Rules.make file.
If you are trying to use ar0331 with WDR flag on , Please un-comment the code of sensor start/stop in sensor driver. e.g ar0331_Api.c in iss.
Look for the same implementation in other sensor driver.
I was having the same issue, it is now resolved, I can get video stream when compile the code with WDR_ON=YES.
Hope it helps.
Thanks