Is there some example to capture video on MCSDK?

Changsheng Li

Expert 2445 points

Other Parts Discussed in Thread: OMAPL138, OMAP-L138

I want to capture video frame data on MCSDK. Is there some example to quickly do this?

Thanks.

over 10 years ago

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Hi Changsheng,

What processor & board are you using ?

If it is OMAPL138 and running linux then you can get open source application from net for capture the image from video stream (camera o/p)

What are you trying to do ?

0 Changsheng Li over 10 years ago in reply to Titusrathinaraj Stalin

Expert 2445 points

Hi Titusrathinaraj Stalin:

Thanks very much for your reply!

My board is base on OMAP-L138.

I want to capture stream on ARM , and share to DSP(IPC or SYSLink).

After install MCSDK, I find that there is not any capture example, so I post question.

Thanks.

0 Sivaraj Kuppuraj over 10 years ago

TI__Mastermind 35645 points

Hi,

Thanks for your post.

Unfortunately, there is no example to capture video on MCSDK.

You can use Ubuntu 10.04 LTS or 12.04 LTS to build the rootfs/bootloader/kernel of MCSDK 1.01. The target filesystem was already available as a part of MCSDK package.

http://processors.wiki.ti.com/index.php/MCSDK_OMAPL138_User_Guide_Chapter_Exploring#Target_File_system

For more information on Linux Host machine set up for MCSDK, please visit http://processors.wiki.ti.com/index.php/MCSDK_OMAPL138_User_Guide_Getting_Started#Linux_Host_Setup

The main TI wiki page of MCSDK user guide which includes the getting started guide, exploring guide, tools are found at http://processors.wiki.ti.com/index.php/MCSDK_User_Guide_for_OMAPL138

Thanks & regards,

Sivaraj K

-------------------------------------------------------------------------------------------------------

Please click the Verify Answer button on this post if it answers your question.

-------------------------------------------------------------------------------------------------------

Processors

Processors forum

Is there some example to capture video on MCSDK?